HCPL-2611#360 Equivalent & Substitute Parts

Part Overview

The HCPL-2611#360 is a Logic Output Optoisolator manufactured by Broadcom Limited, designed for high-speed isolation applications requiring 3750Vrms isolation voltage. This component features open collector output with Schottky clamping, 10MBd data rate capability, and 15kV/µs common mode transient immunity in an 8-DIP Gull Wing surface mount package.

The HCPL-2611#360 is discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and maintenance applications.

Substiute Parts

HCPL-2611#360

Broadcom LimitedIn Stock: 993HCPL-2611#360 Datasheet

Current PartRFQ

HCPL-2611-360E

Broadcom LimitedIn Stock: 953HCPL-2611-360E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HCPL-2611#360 is determined by strict equivalence across the following critical parameters:

• Isolation voltage rating: 3750Vrms
• Single channel configuration with DC input
• Open collector output with Schottky clamping
• Data rate: 10MBd minimum
• Common mode transient immunity: 15kV/µs minimum
• Output current capability: 50 mA per channel
• Propagation delay specifications: tpLH and tpHL maximum 100ns
• Supply voltage range: 4.5V to 5.5V
• Operating temperature range: -40°C to 85°C
• Package type: 8-DIP Gull Wing surface mount

The HCPL-2611-360E meets all these parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-2611-360E is the qualified substitute for the discontinued HCPL-2611#360. Both parts are manufactured by Broadcom Limited and share identical electrical and mechanical specifications across all critical parameters.

The HCPL-2611-360E holds Active product status, ensuring ongoing availability and supply chain continuity. The substitute part is ROHS3 Compliant, providing enhanced environmental compliance compared to the original part's non-compliant status. Both parts maintain equivalent isolation performance, output characteristics, and thermal operating ranges required for direct circuit substitution.

Packaging is supplied in Tube format for the HCPL-2611-360E, with 853 pieces currently in stock.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-2611-360E be used as a direct replacement for the HCPL-2611#360?

A: Yes. The HCPL-2611-360E is electrically and mechanically equivalent to the HCPL-2611#360. All isolation voltage, output current, data rate, propagation delay, and thermal specifications are identical. The 8-DIP Gull Wing package is the same, enabling direct PCB substitution.

Q: What is the difference between HCPL-2611#360 and HCPL-2611-360E?

A: The primary differences are product status and compliance. The HCPL-2611#360 is discontinued and RoHS non-compliant. The HCPL-2611-360E is Active and ROHS3 Compliant. Electrical and mechanical parameters are identical.

Q: Are there any package or pinout differences?

A: No. Both parts use the 8-SMD Gull Wing package with identical pinout and mechanical dimensions. No circuit board modifications are required for substitution.

Q: What isolation voltage does this optoisolator provide?

A: Both the HCPL-2611#360 and HCPL-2611-360E provide 3750Vrms isolation voltage with 15kV/µs common mode transient immunity.

Q: What is the maximum data rate for this component?

A: The maximum data rate is 10MBd for both parts, with propagation delays of 100ns maximum for both rising and falling edges.

Q: Is the HCPL-2611-360E suitable for -40°C to 85°C operating temperature applications?

A: Yes. The HCPL-2611-360E operates across the full -40°C to 85°C temperature range, matching the original part's thermal specifications.