HCPL-2219#060 Equivalent & Substitute Parts

Part Overview

The HCPL-2219#060 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-voltage isolation applications requiring tri-state output capability. This component provides 3750Vrms isolation with a 2.5MBd data rate and 2.5kV/µs common mode transient immunity in an 8-DIP through-hole package.

The HCPL-2219#060 is discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs and system maintenance.

Substiute Parts

HCPL-2219#060

Broadcom LimitedIn Stock: 69359HCPL-2219#060 Datasheet

Current PartRFQ

HCPL-2219-060E

Broadcom LimitedIn Stock: 1018HCPL-2219-060E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-2219#060 are identified based on strict electrical and mechanical parameter matching within the optoisolator category. The following parameters determine substitution eligibility:

• Number of Channels: 1
• Voltage - Isolation: 3750Vrms
• Common Mode Transient Immunity (Min): 2.5kV/µs
• Output Type: Tri-State
• Data Rate: 2.5MBd
• Current - Output / Channel: 25 mA
• Voltage - Supply: 4.5V ~ 20V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole

The HCPL-2219-060E meets all these criteria and is classified as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-2219-060E is the direct substitute for the discontinued HCPL-2219#060. Both parts are manufactured by Broadcom Limited and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction between the two parts is product status and regulatory compliance. The HCPL-2219#060 is discontinued and RoHS non-compliant, while the HCPL-2219-060E is active and ROHS3 compliant. The HCPL-2219-060E is supplied in tube packaging, whereas the original part number does not specify packaging format.

For new designs and production applications, the HCPL-2219-060E is the appropriate selection due to its active status and regulatory compliance certification.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-2219-060E be used as a direct replacement for the HCPL-2219#060?

A: Yes. The HCPL-2219-060E meets all electrical and mechanical specifications of the HCPL-2219#060, including isolation voltage, data rate, output type, and package configuration. Both parts are 8-DIP through-hole components with identical pin configurations and functional characteristics.

Q: What is the difference between HCPL-2219#060 and HCPL-2219-060E?

A: The parts are electrically and mechanically identical. The primary differences are product status (discontinued versus active) and regulatory compliance (RoHS non-compliant versus ROHS3 compliant). The HCPL-2219-060E is supplied in tube packaging.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use the 8-DIP (0.300", 7.62mm) package with through-hole mounting. Pinout and package dimensions are identical, enabling direct board-level substitution.

Q: What compliance certifications apply to the HCPL-2219-060E?

A: The HCPL-2219-060E is ROHS3 compliant and REACH unaffected. The original HCPL-2219#060 is RoHS non-compliant.

Q: Is the HCPL-2219-060E suitable for high-speed isolation applications?

A: Yes. The HCPL-2219-060E supports a 2.5MBd data rate with 300ns maximum propagation delay and 2.5kV/µs common mode transient immunity, meeting the specifications required for high-speed digital isolation in industrial and telecommunications applications.