HCPL-2202#060 Equivalent & Substitute Parts

Part Overview

The HCPL-2202#060 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. It provides 3750Vrms isolation with push-pull totem pole output configuration, supporting data rates up to 5MBd. The device is currently discontinued at DiGi Electronics, making substitute parts necessary for ongoing production and maintenance applications requiring this isolation topology and performance specification.

Substiute Parts

HCPL-2202#060

Broadcom LimitedIn Stock: 774HCPL-2202#060 Datasheet

Current PartRFQ

HCPL-2202-060E

Broadcom LimitedIn Stock: 5917HCPL-2202-060E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HCPL-2202#060 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms (mandatory match)
• Number of Channels: 1 channel (mandatory match)
• Output Configuration: Push-Pull, Totem Pole (mandatory match)
• Common Mode Transient Immunity: 1kV/µs minimum (mandatory match)
• Data Rate: 5MBd (mandatory match)
• Supply Voltage Range: 4.5V ~ 20V (mandatory match)
• Package Type: 8-DIP (0.300", 7.62mm) (mandatory match)
• Mounting Type: Through Hole (mandatory match)

The HCPL-2202-060E qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility across all parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-2202-060E is the direct substitute for the discontinued HCPL-2202#060. Both parts are manufactured by Broadcom Limited and maintain identical electrical and mechanical specifications across all critical parameters.

The primary distinction between the two parts is product status and compliance certification. The HCPL-2202#060 is discontinued and carries RoHS non-compliant status. The HCPL-2202-060E is an active product with ROHS3 compliance, making it the appropriate selection for new designs and applications requiring current regulatory compliance.

Both parts are REACH Unaffected and carry the same ECCN (EAR99) and HTSUS (8541.49.8000) classifications. The HCPL-2202-060E is supplied in tube packaging with significantly higher inventory availability (5900 pcs vs. 723 pcs).

Frequently Asked Questions (FAQ)

Q: Can the HCPL-2202-060E directly replace the HCPL-2202#060 in existing designs?

A: Yes. The HCPL-2202-060E is electrically and mechanically identical to the HCPL-2202#060 across all specified parameters, including isolation voltage, output configuration, data rate, timing characteristics, and package dimensions. No circuit modifications are required.

Q: What is the difference between HCPL-2202#060 and HCPL-2202-060E?

A: The parts are functionally equivalent. The primary differences are product status (discontinued vs. active), RoHS compliance (non-compliant vs. ROHS3 compliant), and packaging format (unspecified vs. tube). The HCPL-2202-060E is the current production equivalent.

Q: Are there any packaging or mounting differences?

A: Both parts use identical 8-DIP (0.300", 7.62mm) through-hole packages. The HCPL-2202-060E is supplied in tube packaging, while the original part number does not specify packaging format. No PCB layout or mounting modifications are necessary.

Q: What isolation voltage does this optoisolator provide?

A: Both the HCPL-2202#060 and HCPL-2202-060E provide 3750Vrms isolation with 1kV/µs common mode transient immunity.

Q: Is the HCPL-2202-060E suitable for new product designs?

A: Yes. The HCPL-2202-060E is an active product with ROHS3 compliance, making it appropriate for new designs and applications requiring current regulatory compliance.