HCPL-2201#560 Equivalent & Substitute Parts

Part Overview

The HCPL-2201#560 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This component provides 3750Vrms isolation with push-pull totem pole output configuration, supporting data rates up to 5MBd. The part is currently discontinued at DiGi Electronics, making substitute part identification essential for ongoing design support and procurement planning.

Substiute Parts

HCPL-2201#560

Broadcom LimitedIn Stock: 928HCPL-2201#560 Datasheet

Current PartRFQ

HCPL-2201-560E

Broadcom LimitedIn Stock: 840HCPL-2201-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HCPL-2201#560 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms (exact match required)
• Number of Channels: 1 (exact match required)
• Output Configuration: Push-Pull, Totem Pole (exact match required)
• Common Mode Transient Immunity: 1kV/µs minimum (exact match required)
• Data Rate: 5MBd (exact match required)
• Output Current: 25 mA per channel (exact match required)
• Supply Voltage Range: 4.5V ~ 20V (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Package Type: 8-SMD, Gull Wing (exact match required)

The HCPL-2201-560E qualifies as a direct substitute based on complete parameter alignment across all electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-2201-560E is the direct substitute for the HCPL-2201#560. Both parts are manufactured by Broadcom Limited and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction between these parts is product status and regulatory compliance. The HCPL-2201#560 is discontinued and carries RoHS non-compliant status. The HCPL-2201-560E is currently active in production and meets ROHS3 compliance requirements, making it the preferred selection for new designs and ongoing procurement.

Packaging differs between the two parts: the original is supplied in bulk format, while the substitute is available in Tape & Reel (TR) configuration. This packaging difference does not affect electrical performance or functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-2201-560E be used as a direct replacement for the HCPL-2201#560?

A: Yes. The HCPL-2201-560E is electrically and mechanically equivalent to the HCPL-2201#560 across all specified parameters, including isolation voltage, output configuration, data rate, and package type.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and compliance certification. The HCPL-2201#560 is discontinued and RoHS non-compliant. The HCPL-2201-560E is active and ROHS3 compliant. Packaging format also differs: bulk versus Tape & Reel.

Q: Are there any performance differences between these parts?

A: No. Both parts deliver identical electrical performance across propagation delay, rise/fall time, output current, and all other functional parameters.

Q: Does the Tape & Reel packaging of the HCPL-2201-560E affect compatibility?

A: No. Tape & Reel is a supply format used for automated assembly processes. The component itself is identical to the bulk-packaged version. The 8-SMD Gull Wing package configuration remains unchanged.

Q: Is the HCPL-2201-560E suitable for designs requiring RoHS compliance?

A: Yes. The HCPL-2201-560E meets ROHS3 compliance requirements, making it appropriate for applications with regulatory compliance mandates.