HCPL-092J Digital Isolator Equivalent & Substitute Parts

Part Overview

The HCPL-092J is a General Purpose Digital Isolator manufactured by Broadcom Limited, featuring 2500Vrms isolation voltage and 4-channel configuration in a 16-SOIC surface mount package. This component is classified as Active product status and utilizes GMR (Giant Magnetoresistive) technology for signal isolation. The need for equivalent and substitute parts arises from inventory availability, compliance requirements, and supply chain considerations across different manufacturing batches and certifications.

Substiute Parts

HCPL-092J

Broadcom LimitedIn Stock: 2171HCPL-092J Datasheet

Current PartRFQ

HCPL-092J-000E

Broadcom LimitedIn Stock: 750430HCPL-092J-000E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-092J is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 2500Vrms (mandatory match)
• Channel Configuration: 4 channels with 3/1 input distribution (mandatory match)
• Data Rate: 110MBd (mandatory match)
• Common Mode Transient Immunity: 15kV/µs minimum (mandatory match)
• Package Type: 16-SOIC (0.154", 3.90mm Width) (mandatory match)
• Technology: GMR (Giant Magnetoresistive) (mandatory match)
• Supply Voltage Range: 3V ~ 5.5V (mandatory match)
• Operating Temperature Range: -55°C ~ 125°C (mandatory match)

The substitute part HCPL-092J-000E meets all electrical and mechanical parameters identically to the main part number, with the distinction of RoHS3 compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both HCPL-092J and HCPL-092J-000E are Active product status components from Broadcom Limited with identical electrical and mechanical specifications. The primary distinction is regulatory compliance: HCPL-092J-000E carries ROHS3 compliance certification, while HCPL-092J is RoHS non-compliant. Selection between these parts depends on project compliance requirements and regional regulations. For applications requiring RoHS3 compliance, HCPL-092J-000E is the appropriate selection. For applications without RoHS compliance mandates, either part is functionally equivalent. Both parts maintain identical isolation performance, data rate capability, and thermal operating range.

Frequently Asked Questions (FAQ)

Q: Can HCPL-092J-000E be used as a direct replacement for HCPL-092J?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including isolation voltage, channel configuration, data rate, and package type. The difference is RoHS3 compliance status in HCPL-092J-000E.

Q: What is the significance of the RoHS3 compliance difference?

A: RoHS3 compliance indicates adherence to Restriction of Hazardous Substances regulations. HCPL-092J-000E meets these requirements; HCPL-092J does not. Selection depends on project and regional compliance mandates.

Q: Are the package dimensions identical between both parts?

A: Yes. Both parts use 16-SOIC (0.154", 3.90mm Width) surface mount packaging with identical footprint and mounting requirements.

Q: Do both parts support the same supply voltage range?

A: Yes. Both HCPL-092J and HCPL-092J-000E operate across 3V to 5.5V supply voltage range with identical performance characteristics.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 125°C temperature range with no performance variation between the two part numbers.

Q: Is there an inventory difference between these parts?

A: Yes. HCPL-092J has 2100 pieces in stock, while HCPL-092J-000E has 750400 pieces available. Availability may influence selection for high-volume applications.