HCPL-0630#500 Equivalent & Substitute Parts

Part Overview

The HCPL-0630#500 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This 2-channel device provides 3750Vrms isolation with open collector Schottky clamped outputs, operating at data rates up to 10MBd. The part is currently active in production and available in Tape & Reel packaging with 948 pieces in stock. Substitute parts are identified based on identical electrical performance specifications and compatible mechanical packaging, enabling direct replacement in circuit designs where the main part number becomes unavailable or where alternative packaging formats are preferred.

Substiute Parts

HCPL-0630#500

Broadcom LimitedIn Stock: 1030HCPL-0630#500 Datasheet

Current PartRFQ

HCPL-0630

Broadcom LimitedIn Stock: 2842HCPL-0630 Datasheet

MFR RecommendedRFQ

HCPL-0630-500E

Broadcom LimitedIn Stock: 35569HCPL-0630-500E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-0630#500 are qualified based on the following criteria:

Electrical Parameter Equivalence: All substitute parts maintain identical specifications for isolation voltage (3750Vrms), channel count (2), output configuration (open collector Schottky clamped), data rate (10MBd), propagation delay (100ns max), and supply voltage range (4.5V ~ 5.5V).

Mechanical Compatibility: All substitute parts use the same 8-SOIC package footprint (0.154", 3.90mm width) with surface mount technology, ensuring PCB layout compatibility.

Functional Equivalence: Input type (DC), output current per channel (50 mA), common mode transient immunity (5kV/µs), and thermal operating range (-40°C ~ 85°C) are identical across all qualified substitutes.

Packaging Format Variation: Substitutes differ only in packaging format (Tube, Cut Tape & Digi-Reel) rather than electrical or mechanical specifications, allowing selection based on procurement and assembly requirements.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers are active products from Broadcom Limited with identical electrical and mechanical specifications. Selection between HCPL-0630#500, HCPL-0630, and HCPL-0630-500E is determined by packaging format requirements and regulatory compliance needs.

HCPL-0630#500 (Tape & Reel): Suitable for high-volume automated assembly operations. RoHS non-compliant status applies to this packaging variant.

HCPL-0630 (Tube): Appropriate for manual assembly, prototyping, or lower-volume production runs. RoHS non-compliant status applies to this packaging variant.

HCPL-0630-500E (Cut Tape & Digi-Reel): Recommended for applications requiring ROHS3 compliance. Offers the highest inventory availability (35,480 pieces) and supports both automated and semi-automated assembly processes through dual packaging format.

All parts maintain identical isolation voltage, channel configuration, data rate, propagation delay, and thermal operating range, ensuring direct functional interchangeability within the same circuit design.

Frequently Asked Questions (FAQ)

Q: Can HCPL-0630#500 be directly replaced with HCPL-0630 or HCPL-0630-500E?

A: Yes. All three part numbers are electrically and mechanically equivalent. They share identical isolation voltage (3750Vrms), channel count (2), output configuration (open collector Schottky clamped), data rate (10MBd), propagation delay (100ns max), and 8-SOIC package footprint. Substitution is valid for circuit functionality.

Q: What is the difference between these substitute parts?

A: The primary differences are packaging format and RoHS compliance status. HCPL-0630#500 uses Tape & Reel packaging, HCPL-0630 uses Tube packaging, and HCPL-0630-500E uses Cut Tape & Digi-Reel packaging with ROHS3 compliance. Electrical specifications are identical.

Q: Which part should be selected for high-volume production?

A: HCPL-0630#500 (Tape & Reel) is optimized for automated pick-and-place assembly. HCPL-0630-500E offers higher inventory availability (35,480 pieces) and dual packaging format flexibility.

Q: Are there RoHS compliance differences between these parts?

A: HCPL-0630#500 and HCPL-0630 are RoHS non-compliant. HCPL-0630-500E is ROHS3 compliant. Select HCPL-0630-500E for applications requiring RoHS3 certification.

Q: Do all substitute parts operate within the same temperature range?

A: Yes. All three parts operate from -40°C to 85°C and maintain identical thermal specifications.

Q: Is PCB layout modification required when substituting between these parts?

A: No. All parts use the same 8-SOIC (0.154", 3.90mm width) surface mount package, ensuring identical PCB footprint and pin compatibility.

Q: What is the moisture sensitivity level for these parts?

A: All three parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.