HCPL-0611#500 Equivalent & Substitute Parts

Part Overview

The HCPL-0611#500 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This 3750Vrms isolation device features open collector output with Schottky clamping, supporting 10MBd data rates and 15kV/µs common mode transient immunity. The part is currently active in production and available in surface mount 8-SOIC packaging. Substitute parts are identified to address packaging availability, compliance requirements, and inventory considerations while maintaining electrical and mechanical compatibility.

Substiute Parts

HCPL-0611#500

Broadcom LimitedIn Stock: 4016HCPL-0611#500 Datasheet

Current PartRFQ

HCPL-0611-000E

Broadcom LimitedIn Stock: 1396HCPL-0611-000E Datasheet

DirectRFQ

HCPL-0611-500E

Broadcom LimitedIn Stock: 20539HCPL-0611-500E Datasheet

MFR RecommendedRFQ

HCPL-0611

Broadcom LimitedIn Stock: 14058HCPL-0611 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-0611#500 are qualified based on the following criteria:

Electrical Compatibility: All substitute parts maintain identical isolation voltage (3750Vrms), common mode transient immunity (15kV/µs), output type (open collector with Schottky clamping), data rate (10MBd), propagation delay specifications, and supply voltage range (4.5V ~ 5.5V).

Mechanical Compatibility: All substitute parts use the same package type (8-SOIC, 0.154" width, 3.90mm) and mounting technology (surface mount), ensuring PCB layout compatibility.

Functional Equivalence: All parts are single-channel DC input optoisolators with identical channel configuration (1 input, 0 side 2 inputs) and output current rating (50 mA).

Substitution Variables: Parts differ in packaging format (Tape & Reel, Tube, Cut Tape & Digi-Reel), RoHS compliance status, and inventory availability. These differences do not affect electrical or mechanical performance in the application.

Parameter Comparison

Engineering Selection Recommendations

All four part numbers are active products from Broadcom Limited with identical electrical and mechanical specifications. Selection between them is determined by packaging requirements and regulatory compliance needs.

HCPL-0611#500 (Tape & Reel): Original specification part. RoHS non-compliant. Suitable for applications without RoHS requirements. Moderate inventory availability.

HCPL-0611-000E (Tube): Direct electrical equivalent with ROHS3 compliance. Tube packaging accommodates manual assembly and small-volume production. Lower inventory levels.

HCPL-0611-500E (Cut Tape & Digi-Reel): Direct electrical equivalent with ROHS3 compliance. Cut Tape and Digi-Reel packaging supports automated pick-and-place assembly. Highest inventory availability.

HCPL-0611 (Unspecified Packaging): Base part number without packaging designation. RoHS non-compliant. Suitable for applications without RoHS requirements. High inventory availability.

For new designs or applications requiring RoHS compliance, HCPL-0611-000E or HCPL-0611-500E are appropriate selections. For automated assembly processes, HCPL-0611-500E is preferred due to Cut Tape and Digi-Reel packaging compatibility.

Frequently Asked Questions (FAQ)

Q: Can HCPL-0611-500E replace HCPL-0611#500 in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel) and RoHS compliance status. PCB layout and circuit design require no modification.

Q: What is the difference between Tape & Reel, Tube, and Cut Tape & Digi-Reel packaging?

A: Tape & Reel and Cut Tape & Digi-Reel are both reel-based formats suitable for automated assembly equipment. Tube packaging is used for manual assembly or small-quantity handling. All three formats contain the same component in the same 8-SOIC package.

Q: Are all substitute parts pin-compatible?

A: Yes. All parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pinout and electrical characteristics. Direct substitution on the PCB is possible without design changes.

Q: Does RoHS compliance affect electrical performance?

A: No. ROHS3 compliance indicates manufacturing process changes to eliminate restricted substances. Electrical specifications, isolation voltage, data rate, and all performance parameters remain identical between RoHS-compliant and non-compliant versions.

Q: Which part should be selected for high-volume automated assembly?

A: HCPL-0611-500E is optimized for automated assembly with Cut Tape and Digi-Reel packaging. It also offers the highest inventory availability and ROHS3 compliance.

Q: Are there any thermal or environmental differences between substitute parts?

A: No. All parts share identical operating temperature range (-40°C ~ 85°C), moisture sensitivity level (MSL 1 - Unlimited), and environmental specifications.