HCPL-0611#060 Equivalent & Substitute Parts

Part Overview

The HCPL-0611#060 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This 3.75kVrms isolation device features open collector output with Schottky clamping, supporting 10MBd data rates and 15kV/µs common mode transient immunity. The component is currently active in production and available in 8-SOIC surface mount packaging. Substitute parts are identified to address inventory availability, compliance requirements, or packaging preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

HCPL-0611#060

Broadcom LimitedIn Stock: 765HCPL-0611#060 Datasheet

Current PartRFQ

HCPL-0611-060E

Broadcom LimitedIn Stock: 2383HCPL-0611-060E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HCPL-0611#060 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms (mandatory match)
• Number of Channels: 1 (mandatory match)
• Output Configuration: Open Collector, Schottky Clamped (mandatory match)
• Data Rate: 10MBd (mandatory match)
• Common Mode Transient Immunity: 15kV/µs minimum (mandatory match)
• Package Type: 8-SOIC surface mount (mandatory match)
• Electrical Specifications: Propagation delay, rise/fall time, supply voltage, and operating temperature range (mandatory match)

The HCPL-0611-060E qualifies as a direct substitute based on complete alignment with all electrical and mechanical parameters. Differences in RoHS compliance status do not affect functional substitutability.

Parameter Comparison

Engineering Selection Recommendations

Both the HCPL-0611#060 and HCPL-0611-060E are active production components from Broadcom Limited with identical electrical and mechanical specifications. Selection between these parts should be based on regulatory and compliance requirements:

• HCPL-0611#060: Select when RoHS non-compliance is acceptable or when legacy system requirements mandate this specific part number.
• HCPL-0611-060E: Select for applications requiring ROHS3 compliance or when environmental regulations mandate lead-free construction.

Both parts carry REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity rating, indicating equivalent handling and storage requirements. Inventory availability may also influence selection, with HCPL-0611-060E currently showing higher stock levels (2300 pcs vs. 676 pcs).

Frequently Asked Questions (FAQ)

Q: Can HCPL-0611-060E be used as a direct replacement for HCPL-0611#060 in existing designs?

A: Yes. The HCPL-0611-060E is electrically and mechanically identical to the HCPL-0611#060. All functional parameters, timing specifications, and package dimensions are equivalent. The primary difference is RoHS compliance status.

Q: What is the significance of the RoHS compliance difference?

A: RoHS compliance affects material composition and environmental regulations. HCPL-0611-060E meets ROHS3 standards (lead-free), while HCPL-0611#060 does not. Selection depends on end-product regulatory requirements and regional environmental directives.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use identical 8-SOIC (0.154", 3.90mm Width) surface mount packaging with the same pinout and mechanical footprint.

Q: What are the critical parameters that define substitutability for this optoisolator?

A: Substitutability is determined by: isolation voltage (3750Vrms), channel count (1), output configuration (open collector with Schottky clamping), data rate (10MBd), common mode transient immunity (15kV/µs), and package type (8-SOIC). Any deviation in these parameters disqualifies a part as a direct substitute.

Q: Can parts with different isolation voltages or data rates be used interchangeably?

A: No. Isolation voltage and data rate are critical electrical specifications. Parts with different values are not functionally equivalent and cannot be substituted without circuit redesign and validation.