HCPL-060L#500 Equivalent & Substitute Parts

Part Overview

The HCPL-060L#500 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This component features 3750Vrms isolation voltage, 15MBd data rate, and open collector Schottky clamped output configuration in an 8-SOIC surface mount package. The part is currently active in production. Substitute parts are identified to address packaging format availability and compliance requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

HCPL-060L#500

Broadcom LimitedIn Stock: 2245HCPL-060L#500 Datasheet

Current PartRFQ

HCPL-060L-500E

Broadcom LimitedIn Stock: 24105HCPL-060L-500E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-060L#500 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution criteria are:

• Identical isolation voltage (3750Vrms)
• Identical number of channels (1)
• Identical common mode transient immunity (10kV/µs minimum)
• Identical data rate (15MBd)
• Identical output configuration (Open Collector, Schottky Clamped)
• Identical output current capability (50 mA per channel)
• Identical supply voltage range (2.7V ~ 3.6V, 4.5V ~ 5.5V)
• Identical operating temperature range (-40°C ~ 85°C)
• Identical package type and dimensions (8-SOIC, 0.154", 3.90mm Width)
• Identical mounting type (Surface Mount)
• Same base product number (HCPL-060)

The primary difference between the main part and substitute is packaging format: HCPL-060L#500 is supplied in Tape & Reel (TR) format, while HCPL-060L-500E is supplied in Cut Tape (CT) & Digi-Reel® format.

Parameter Comparison

Engineering Selection Recommendations

Both HCPL-060L#500 and HCPL-060L-500E are active production parts from Broadcom Limited with identical electrical performance and mechanical specifications. Selection between these parts is determined by packaging format requirements and regulatory compliance needs.

The HCPL-060L-500E variant offers ROHS3 compliance, making it suitable for applications subject to RoHS3 regulatory requirements. The HCPL-060L#500 is RoHS non-compliant and should be selected only when RoHS compliance is not a project requirement.

Packaging format differences (Tape & Reel versus Cut Tape & Digi-Reel®) do not affect component performance or compatibility. Selection should be based on assembly equipment capabilities and procurement volume requirements.

Frequently Asked Questions (FAQ)

Q: Can HCPL-060L-500E be used as a direct replacement for HCPL-060L#500?

A: Yes. Both parts are electrically and mechanically identical. The HCPL-060L-500E differs only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and RoHS compliance status. Functional performance in the circuit is identical.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® are different supply formats for surface mount components. Tape & Reel is continuous tape on a reel suitable for high-volume automated assembly. Cut Tape & Digi-Reel® provides components on cut tape segments, typically for lower volumes or mixed component orders. The actual component specifications and performance are identical.

Q: Does the RoHS3 compliance difference affect circuit performance?

A: No. RoHS3 compliance is a regulatory and material composition specification, not a functional performance specification. Both parts perform identically in circuit applications. RoHS3 compliance is relevant only for regulatory and procurement requirements.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both parts have identical operating temperature range (-40°C ~ 85°C), supply voltage specifications (2.7V ~ 3.6V, 4.5V ~ 5.5V), isolation voltage (3750Vrms), data rate (15MBd), and all other electrical parameters.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. Both parts use the same 8-SOIC package with identical pin configuration and dimensions (0.154", 3.90mm Width). They are mechanically and electrically interchangeable on the same PCB layout.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, select HCPL-060L-500E. For applications without RoHS compliance requirements, either part is suitable. Packaging format selection should be based on assembly equipment and procurement volume.