HCPL-0601-060E Equivalent & Substitute Parts

Part Overview

The HCPL-0601-060E is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This 3750Vrms isolation device features open collector output with Schottky clamping, operating at 10MBd data rate with 10kV/µs common mode transient immunity. The component is actively produced and widely stocked, with 1900 units available in inventory. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling design flexibility and supply chain optimization.

Substiute Parts

HCPL-0601-060E

Broadcom LimitedIn Stock: 1952HCPL-0601-060E Datasheet

Current PartRFQ

FOD060L

onsemiIn Stock: 26785FOD060L Datasheet

MFR RecommendedRFQ

FOD060LR2

onsemiIn Stock: 27440FOD060LR2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-0601-060E are qualified based on the following critical parameters that determine functional equivalence:

• Isolation Voltage: 3750Vrms (matched across all substitutes)
• Number of Channels: 1 (single channel configuration)
• Output Type: Open Collector, Schottky Clamped (identical topology)
• Package / Case: 8-SOIC form factor with 0.154" (3.90mm) width (mechanical compatibility)
• Mounting Type: Surface Mount (PCB assembly compatibility)
• Operating Temperature Range: -40°C ~ 85°C (thermal envelope)
• Data Rate: 10MBd / 10Mbps (signal bandwidth)
• Current - Output / Channel: 50 mA (load drive capability)
• Product Status: Active (ongoing manufacturing and support)
• Compliance: ROHS3 Compliant, REACH Unaffected, EAR99 classification

The onsemi FOD060L and FOD060LR2 devices meet all substitution criteria. The primary difference between these substitutes and the main part is the packaging format (Tube vs. Tape & Reel) and enhanced common mode transient immunity specification (25kV/µs vs. 10kV/µs), which represents improved performance margin.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status with continuous manufacturing support and full regulatory compliance (ROHS3, REACH Unaffected, EAR99 classification). Selection between the HCPL-0601-060E and onsemi substitutes depends on supply availability and packaging requirements:

FOD060L (Tube Packaging): Suitable for applications requiring tube-packaged components for manual assembly or lower-volume production runs. Inventory availability is 26,766 units.

FOD060LR2 (Tape & Reel Packaging): Optimized for high-volume automated assembly processes utilizing standard pick-and-place equipment. Inventory availability is 27,400 units. This packaging format is standard for production environments.

Both onsemi substitutes provide improved timing performance (reduced propagation delay and fall time) and enhanced common mode transient immunity (25kV/µs vs. 10kV/µs), representing superior electrical margins. The onsemi devices also support extended supply voltage range (3V minimum vs. 4.5V minimum), enabling operation in lower-voltage system designs.

Frequently Asked Questions (FAQ)

Q: Are FOD060L and FOD060LR2 pin-compatible with HCPL-0601-060E?

A: Yes. All three devices use identical 8-SOIC package geometry with 0.154" (3.90mm) width. Pin assignments and functional behavior are equivalent for open collector optoisolator applications.

Q: What is the difference between FOD060L and FOD060LR2?

A: Both devices are electrically identical. The primary difference is packaging format: FOD060L is supplied in Tube packaging for manual handling, while FOD060LR2 is supplied in Tape & Reel (TR) format for automated assembly equipment.

Q: Can I use FOD060L or FOD060LR2 as a direct replacement in existing designs using HCPL-0601-060E?

A: Yes. The substitutes meet all critical electrical and mechanical parameters. Improved timing performance and common mode transient immunity provide enhanced design margins.

Q: What is the significance of the 25kV/µs common mode transient immunity in the onsemi parts versus 10kV/µs in the Broadcom part?

A: Common mode transient immunity (CMTI) specifies the maximum rate of change of common mode voltage that the device can tolerate without causing false output transitions. The onsemi devices tolerate 2.5 times faster voltage transitions, providing greater immunity to noise and transient events in high-speed switching environments.

Q: Are there supply voltage compatibility considerations?

A: The onsemi substitutes support 3V to 5.5V supply range, while the HCPL-0601-060E requires 4.5V to 5.5V. In applications using 3V to 4.4V supply rails, only the onsemi parts are suitable.

Q: Do all three parts meet the same regulatory and compliance standards?

A: Yes. All three devices are ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes. Moisture sensitivity level is 1 (Unlimited) for all parts.