Request Quote
(Ships tomorrow)
HCPL0600R1 Equivalent & Substitute Parts
Part Overview
The HCPL0600R1 is a logic output optoisolator manufactured by onsemi, featuring 3.75kV isolation voltage, open collector output, and 10Mbps data rate in an 8-SOIC package. This component is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production support. The part provides galvanic isolation suitable for industrial control, motor drive, and power conversion applications requiring high-speed signal isolation with robust common mode transient immunity.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Isolation Voltage | 3750Vrms |
| Number of Channels | 1 |
| Output Type | Open Collector |
| Data Rate | 10Mbps |
| Common Mode Transient Immunity (Min) | 5kV/µs |
| Output Current | 50 mA |
| Supply Voltage | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C |
| Package | 8-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount |
Substitute Part Grouping Explanation
Substitution for the HCPL0600R1 is determined by strict equivalence in the following critical parameters: isolation voltage (3750Vrms), number of channels (1), output type (open collector), package format (8-SOIC), and operating temperature range (-40°C ~ 85°C). The substitute parts are grouped into two categories based on data rate and common mode transient immunity specifications:
Direct Equivalent (10Mbps, 5kV/µs CMTI): HCPL-0600-500E maintains identical electrical performance to the original part with active product status and improved availability.
Enhanced Performance Alternatives (15MBd, 10kV/µs CMTI): HCPL-060L series parts offer higher data rate and superior common mode transient immunity while maintaining full backward compatibility in isolation voltage, output type, package, and temperature range. These parts are suitable for applications where the original specifications are met or exceeded.
Lower CMTI Alternative (10MBd, 1kV/µs CMTI): HCPL-061A series provides reduced common mode transient immunity but maintains 10MBd data rate and identical isolation voltage, suitable for applications with lower transient requirements.
Parameter Comparison
| Parameter | HCPL0600R1 | HCPL-0600-500E | HCPL-060L-500E | HCPL-060L-560E | HCPL-061A-500E |
|---|---|---|---|---|---|
| Manufacturer | onsemi | Broadcom Limited | Broadcom Limited | Broadcom Limited | Broadcom Limited |
| Product Status | Obsolete | Active | Active | Active | Active |
| Isolation Voltage | 3750Vrms | 3750Vrms | 3750Vrms | 3750Vrms | 3750Vrms |
| Number of Channels | 1 | 1 | 1 | 1 | 1 |
| Output Type | Open Collector | Open Collector, Schottky Clamped | Open Collector, Schottky Clamped | Open Collector, Schottky Clamped | Open Collector, Schottky Clamped |
| Data Rate | 10Mbps | 10MBd | 15MBd | 15MBd | 10MBd |
| CMTI (Min) | 5kV/µs | 5kV/µs | 10kV/µs | 10kV/µs | 1kV/µs |
| Output Current | 50 mA | 50 mA | 50 mA | 50 mA | 50 mA |
| Propagation Delay tpLH / tpHL (Max) | 75ns / 75ns | 100ns / 100ns | 75ns / 75ns | 75ns / 75ns | 100ns / 100ns |
| Supply Voltage | 4.5V ~ 5.5V | 4.5V ~ 5.5V | 2.7V ~ 3.6V, 4.5V ~ 5.5V | 2.7V ~ 3.6V, 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| RoHS Status | Not specified | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
Engineering Selection Recommendations
HCPL-0600-500E is the primary direct equivalent for HCPL0600R1 replacement. It maintains identical electrical specifications (10Mbps, 5kV/µs CMTI) with active product status and ROHS3 compliance. This part is recommended for applications requiring exact performance matching with improved long-term availability.
HCPL-060L series (HCPL-060L-500E, HCPL-060L-560E) offers enhanced performance with 15MBd data rate and 10kV/µs CMTI while maintaining full backward compatibility. These parts are suitable for new designs or upgrades where higher performance margins are beneficial. HCPL-060L-500E in Cut Tape & Digi-Reel packaging provides the highest inventory availability (24,075 pcs).
HCPL-061A-500E is applicable only when application requirements permit reduced common mode transient immunity (1kV/µs). This part maintains 10MBd data rate and is suitable for lower-speed isolation applications with less stringent transient performance requirements.
All substitute parts maintain the 8-SOIC package format, 3750Vrms isolation voltage, single-channel configuration, and -40°C to 85°C operating temperature range. Selection should prioritize active product status and ROHS3 compliance for new production designs.
Frequently Asked Questions (FAQ)
Q: Can HCPL-060L series parts directly replace HCPL0600R1 in existing designs?
A: Yes. HCPL-060L series parts maintain identical isolation voltage, package, channel count, and operating temperature. The higher data rate (15MBd vs. 10Mbps) and superior CMTI (10kV/µs vs. 5kV/µs) are backward compatible. Propagation delay is identical (75ns max), ensuring timing compatibility.
Q: What is the difference between HCPL-0600-500E and HCPL-060L-500E?
A: HCPL-0600-500E matches the original HCPL0600R1 specifications exactly (10Mbps, 5kV/µs CMTI). HCPL-060L-500E provides enhanced performance with 15MBd data rate and 10kV/µs CMTI. Both use identical 8-SOIC packaging and maintain full electrical compatibility.
Q: Are there supply voltage differences between substitute parts?
A: HCPL-060L series supports dual supply ranges (2.7V ~ 3.6V and 4.5V ~ 5.5V), while HCPL0600R1, HCPL-0600-500E, and HCPL-061A-500E operate only at 4.5V ~ 5.5V. For 5V supply applications, all parts are compatible.
Q: What packaging options are available for substitute parts?
A: HCPL-0600-500E is available in Cut Tape & Digi-Reel format. HCPL-060L series offers multiple packaging options: Tube (HCPL-060L, HCPL-060L-000E, HCPL-060L-060E), Cut Tape & Digi-Reel (HCPL-060L-500E), and Tape & Reel (HCPL-060L-560, HCPL-060L-560E). HCPL-061A-500E is supplied in Cut Tape & Digi-Reel format.
Q: Why is HCPL-061A not recommended as a primary substitute?
A: HCPL-061A series has reduced common mode transient immunity (1kV/µs vs. 5kV/µs), making it unsuitable for applications requiring the original part's transient performance. Use only when application specifications explicitly permit lower CMTI values.
Q: Are all substitute parts RoHS compliant?
A: All active substitute parts listed are ROHS3 compliant. The original HCPL0600R1 (obsolete) does not specify RoHS status. HCPL-060L-560 is RoHS non-compliant; use HCPL-060L-560E (ROHS3 compliant) instead.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts