HCPL-0600#560 Equivalent & Substitute Parts

Part Overview

The HCPL-0600#560 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This single-channel device provides 3750Vrms isolation with open collector Schottky clamped output, supporting data rates up to 10MBd. The component is currently in active production status. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate varying compliance requirements across different procurement scenarios.

Substiute Parts

HCPL-0600#560

Broadcom LimitedIn Stock: 1164HCPL-0600#560 Datasheet

Current PartRFQ

HCPL-0600-560E

Broadcom LimitedIn Stock: 3044HCPL-0600-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-0600#560 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms (mandatory match)
• Number of Channels: 1 (mandatory match)
• Output Configuration: Open Collector, Schottky Clamped (mandatory match)
• Data Rate: 10MBd (mandatory match)
• Common Mode Transient Immunity: 5kV/µs (mandatory match)
• Package Type: 8-SOIC surface mount (mandatory match)
• Supply Voltage Range: 4.5V ~ 5.5V (mandatory match)
• Operating Temperature Range: -40°C ~ 85°C (mandatory match)

The substitute part HCPL-0600-560E meets all electrical and mechanical parameters identically to the main part number. The primary distinction lies in compliance certification status.

Parameter Comparison

Engineering Selection Recommendations

Both HCPL-0600#560 and HCPL-0600-560E are active production parts from Broadcom Limited with identical electrical and mechanical specifications. The HCPL-0600#560 carries RoHS non-compliant status, while the HCPL-0600-560E is RoHS3 compliant. Both parts maintain REACH Unaffected status and carry the same ECCN and HTSUS classifications.

Selection between these parts should be based on regulatory and compliance requirements applicable to the end application. Applications requiring RoHS3 compliance must use HCPL-0600-560E. Applications without RoHS compliance mandates may use either part interchangeably from an electrical and mechanical standpoint.

Frequently Asked Questions (FAQ)

Q: Are HCPL-0600#560 and HCPL-0600-560E electrically identical?

A: Yes. Both parts share identical electrical specifications including isolation voltage (3750Vrms), data rate (10MBd), output configuration (open collector Schottky clamped), propagation delay, rise/fall times, and supply voltage requirements.

Q: What is the primary difference between these part numbers?

A: The primary difference is RoHS compliance status. HCPL-0600#560 is RoHS non-compliant, while HCPL-0600-560E is RoHS3 compliant. All other specifications remain identical.

Q: Can I substitute HCPL-0600-560E for HCPL-0600#560 in existing designs?

A: Yes. The HCPL-0600-560E is a direct substitute with identical electrical and mechanical parameters. No circuit modifications are required.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pinout and mounting requirements for surface mount assembly.

Q: Which part should I select for new designs?

A: Selection depends on compliance requirements. For applications requiring RoHS3 compliance, use HCPL-0600-560E. Both parts are in active production and equally available.