HCPL-0600#500 Equivalent & Substitute Parts

Part Overview

The HCPL-0600#500 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This component provides 3750Vrms isolation with open collector Schottky clamped output, supporting data rates up to 10MBd. The part is currently active in production and available in Tape & Reel packaging. Substitute parts are identified to address packaging availability, compliance requirements, and supply chain flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

HCPL-0600#500

Broadcom LimitedIn Stock: 6157HCPL-0600#500 Datasheet

Current PartRFQ

HCPL-0600

Broadcom LimitedIn Stock: 10230HCPL-0600 Datasheet

MFR RecommendedRFQ

HCPL-0600-000E

Broadcom LimitedIn Stock: 1178HCPL-0600-000E Datasheet

MFR RecommendedRFQ

HCPL-0600-500E

Broadcom LimitedIn Stock: 94445HCPL-0600-500E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-0600#500 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Voltage - Isolation: 3750Vrms
• Common Mode Transient Immunity: 5kV/µs minimum
• Output Type: Open Collector, Schottky Clamped
• Current - Output / Channel: 50 mA
• Data Rate: 10MBd
• Voltage - Supply: 4.5V ~ 5.5V
• Operating Temperature: -40°C ~ 85°C

Mechanical Parameters (Must Match):

• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Number of Channels: 1

Variable Parameters (Allowed to Differ):

• Packaging format (Tape & Reel, Tube, Cut Tape & Digi-Reel)
• RoHS compliance status
• Inventory availability

All substitute parts maintain identical functional performance and are pin-compatible with the main part number.

Parameter Comparison

Engineering Selection Recommendations

HCPL-0600#500 (Original Part): Specified for applications requiring Tape & Reel packaging format. RoHS non-compliant status applies to legacy or non-regulated applications.

HCPL-0600 (Substitute): Functionally identical to the main part with Tube packaging. Suitable for applications where Tube format is acceptable. Maintains RoHS non-compliant status. Higher inventory availability (10200 Pcs) supports extended lead times.

HCPL-0600-000E (Substitute): Functionally identical with ROHS3 compliance certification. Tube packaging format. Recommended for applications subject to RoHS3 regulatory requirements. Lower inventory (1140 Pcs) may impact availability for high-volume orders.

HCPL-0600-500E (Substitute): Functionally identical with ROHS3 compliance certification. Cut Tape & Digi-Reel packaging format. Highest inventory availability (94402 Pcs) supports immediate fulfillment. Recommended for high-volume production and applications requiring RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can HCPL-0600-500E replace HCPL-0600#500 in my circuit?

A: Yes. HCPL-0600-500E is electrically and mechanically identical to HCPL-0600#500. Both components feature 3750Vrms isolation, 5kV/µs CMTI, 10MBd data rate, and 8-SOIC packaging. The difference is packaging format (Cut Tape & Digi-Reel vs. Tape & Reel) and RoHS3 compliance status.

Q: What is the difference between Tape & Reel, Tube, and Cut Tape packaging?

A: Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel are automated assembly formats suitable for high-speed pick-and-place equipment. Tube packaging is manual handling format. All three formats contain identical components with the same electrical specifications. Selection depends on assembly process requirements and equipment compatibility.

Q: Does RoHS3 compliance affect electrical performance?

A: No. RoHS3 compliance is a material composition certification that does not alter electrical or thermal performance. HCPL-0600-000E and HCPL-0600-500E maintain identical electrical specifications to the non-compliant versions. RoHS3 compliance is required only for applications subject to regulatory mandates.

Q: Are all substitute parts pin-compatible?

A: Yes. All listed substitute parts use the 8-SOIC package with identical pinout and electrical characteristics. Direct substitution is possible without circuit modification.

Q: Which substitute part should I select for high-volume production?

A: HCPL-0600-500E is recommended for high-volume production due to highest inventory availability (94402 Pcs), Cut Tape & Digi-Reel packaging compatibility with automated assembly, and ROHS3 compliance certification.