HCPL-0600#060 Equivalent & Substitute Parts

Part Overview

The HCPL-0600#060 is a Logic Output Optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. This 3.75kV isolation rated component features open collector output with Schottky clamping, operating at 10MBd data rate with 5kV/µs common mode transient immunity. The part is currently in active production status with 1054 units available in inventory. Substitute parts are identified to address specific compliance requirements or packaging preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

HCPL-0600#060

Broadcom LimitedIn Stock: 1095HCPL-0600#060 Datasheet

Current PartRFQ

HCPL-0600-060E

Broadcom LimitedIn Stock: 685HCPL-0600-060E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HCPL-0600#060 is determined by strict equivalence across the following critical parameters:

• Number of Channels: 1
• Voltage - Isolation: 3750Vrms
• Common Mode Transient Immunity (Min): 5kV/µs
• Output Type: Open Collector, Schottky Clamped
• Current - Output / Channel: 50 mA
• Data Rate: 10MBd
• Propagation Delay tpLH / tpHL (Max): 100ns, 100ns
• Voltage - Supply: 4.5V ~ 5.5V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount

The identified substitute part HCPL-0600-060E maintains identical electrical specifications and mechanical compatibility. Differences are limited to RoHS compliance status and packaging designation.

Parameter Comparison

Engineering Selection Recommendations

Both HCPL-0600#060 and HCPL-0600-060E are active production parts from Broadcom Limited with identical electrical and mechanical specifications. Selection between these parts is determined by regulatory compliance requirements:

• HCPL-0600#060 is suitable for applications where RoHS compliance is not mandated.
• HCPL-0600-060E is required for applications subject to ROHS3 compliance regulations.

Both parts carry REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity rating. Inventory availability: HCPL-0600#060 (1054 units), HCPL-0600-060E (656 units).

Frequently Asked Questions (FAQ)

Q: Are HCPL-0600#060 and HCPL-0600-060E electrically interchangeable?

A: Yes. Both parts are identical in all electrical parameters including isolation voltage, data rate, propagation delay, output current, and supply voltage specifications. They are direct functional equivalents.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. HCPL-0600#060 is RoHS non-compliant, while HCPL-0600-060E is ROHS3 compliant. All other specifications, including package type, thermal characteristics, and electrical performance, are identical.

Q: Can I use HCPL-0600-060E as a drop-in replacement for HCPL-0600#060?

A: Yes. Both parts use the same 8-SOIC package with identical pinout and electrical characteristics. No circuit modifications are required for substitution.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. For applications requiring ROHS3 compliance, use HCPL-0600-060E. For applications without RoHS requirements, either part is acceptable based on availability and cost considerations.

Q: Are there any thermal or reliability differences between these parts?

A: No. Both parts share identical operating temperature range (-40°C to 85°C), moisture sensitivity level (MSL 1), and REACH status. Thermal and reliability characteristics are equivalent.