HCPL-0500-560E Equivalent & Substitute Parts

Part Overview

The HCPL-0500-560E is an optoisolator transistor with base output manufactured by Broadcom Limited, designed for high-voltage isolation applications requiring 3750Vrms isolation rating. This surface-mount component operates across the industrial temperature range of -55°C to 100°C and is classified as Active product status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, manufacturing discontinuation, or design flexibility needs.

Substiute Parts

HCPL-0500-560E

Broadcom LimitedIn Stock: 836HCPL-0500-560E Datasheet

Current PartRFQ

HCPL-0500-500E

Broadcom LimitedIn Stock: 7978HCPL-0500-500E Datasheet

Parametric EquivalentRFQ

EL0501(TA)

Everlight Electronics Co LtdIn Stock: 6796EL0501(TA) Datasheet

MFR RecommendedRFQ

SFH6315T

Vishay Semiconductor Opto DivisionIn Stock: 1453SFH6315T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-0500-560E are qualified based on the following critical parameters that determine functional equivalence:

• Isolation Voltage: Minimum 3750Vrms (higher ratings acceptable)
• Output Configuration: Transistor with Base output topology
• Number of Channels: Single channel
• Package Type: 8-SOIC or compatible 8-pin surface-mount package
• Operating Temperature Range: -55°C to 100°C minimum
• Output Voltage Rating: Minimum 20V
• Output Current Capability: Minimum 8mA per channel
• Input Type: DC
• RoHS Compliance: ROHS3 Compliant

The HCPL-0500-560E has two qualified substitutes: HCPL-0500-500E (parametric equivalent with different packaging) and EL0501(TA) (manufacturer-recommended equivalent from Everlight Electronics). The SFH6315T from Vishay Semiconductor Opto Division is also listed as a manufacturer-recommended substitute with enhanced isolation voltage specification.

Parameter Comparison

Engineering Selection Recommendations

HCPL-0500-500E: This Broadcom Limited part is a parametric equivalent to the HCPL-0500-560E with identical electrical specifications. The primary difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel). Both parts maintain ROHS3 compliance and MSL Level 1 rating. Selection between these two Broadcom variants depends on procurement and assembly requirements.

EL0501(TA): This Everlight Electronics substitute meets all isolation voltage, output configuration, and temperature range requirements. The EL0501(TA) provides a wider current transfer ratio specification (19% to 50% @ 16mA) compared to the HCPL-0500-560E minimum of 5%. Turn-on and turn-off times are slower (800ns each) than the primary part. This substitute is suitable for applications where faster switching is not critical. ROHS3 compliance and MSL Level 1 rating are maintained.

SFH6315T: This Vishay Semiconductor Opto Division substitute offers enhanced isolation voltage (4000Vrms versus 3750Vrms) and higher maximum output voltage (25V versus 20V). Switching times are intermediate (500ns for both turn-on and turn-off). The SFH6315T provides additional design margin for high-voltage isolation applications. All compliance certifications match the primary part.

All substitute parts are Active product status with ROHS3 compliance and unlimited moisture sensitivity level rating, ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can HCPL-0500-500E be used as a direct replacement for HCPL-0500-560E?

A: Yes. Both parts are manufactured by Broadcom Limited and share identical electrical specifications including isolation voltage (3750Vrms), current transfer ratio (5% @ 16mA), switching times (200ns/1.3µs), and operating temperature range (-55°C to 100°C). The difference is packaging format: HCPL-0500-560E uses Tape & Reel while HCPL-0500-500E uses Cut Tape & Digi-Reel. PCB layout and assembly processes remain unchanged.

Q: What are the switching time differences between substitute parts?

A: The HCPL-0500-560E and HCPL-0500-500E both specify 200ns turn-on and 1.3µs turn-off times. The EL0501(TA) has slower switching at 800ns for both turn-on and turn-off. The SFH6315T provides intermediate switching performance at 500ns for both parameters. Applications requiring fast switching should prioritize the Broadcom variants or SFH6315T over EL0501(TA).

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All four parts use the 8-SOIC package with 0.154" width and 3.90mm body width. PCB footprints, land patterns, and assembly processes are identical across all substitutes.

Q: What is the difference in current transfer ratio specifications?

A: The HCPL-0500-560E specifies a minimum of 5% @ 16mA with no maximum value provided. The EL0501(TA) and SFH6315T both specify ranges: 19% to 50% @ 16mA and 7% to 50% @ 16mA respectively. Higher current transfer ratios provide greater design margin and may reduce input current requirements in some circuit topologies.

Q: Which substitute offers the highest isolation voltage rating?

A: The SFH6315T provides 4000Vrms isolation compared to 3750Vrms for the HCPL-0500-560E, HCPL-0500-500E, and EL0501(TA). The SFH6315T is suitable for applications requiring enhanced isolation margin.

Q: Do all parts meet the same compliance standards?

A: Yes. All four parts are ROHS3 compliant with MSL Level 1 (Unlimited) moisture sensitivity rating. ECCN classification is EAR99 for all parts. Compliance certifications are equivalent across all substitutes.

Q: What is the maximum output voltage difference between parts?

A: The HCPL-0500-560E, HCPL-0500-500E, and EL0501(TA) all specify 20V maximum output voltage. The SFH6315T specifies 25V maximum output voltage, providing additional voltage headroom for output circuit design.