HCPL-0500#060 Equivalent & Substitute Parts

Part Overview

The HCPL-0500#060 is a single-channel optoisolator with transistor output and base connection, manufactured by Broadcom Limited. It provides 3750Vrms isolation voltage and is housed in an 8-SO surface mount package. This part is discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing production and maintenance applications. The optoisolator is designed for DC input applications requiring galvanic isolation with transistor-based output control.

Key Parameters

Parameter	Value
Manufacturer	Broadcom Limited
Part Number	HCPL-0500#060
Category	Optoisolators
Number of Channels	1
Voltage - Isolation	3750Vrms
Current Transfer Ratio (Min)	5% @ 16mA
Turn On / Turn Off Time (Typ)	200ns, 1.3µs
Output Type	Transistor with Base
Voltage - Output (Max)	20V
Current - Output / Channel	8mA
Voltage - Forward (Vf) (Typ)	1.5V
Current - DC Forward (If) (Max)	25mA
Operating Temperature	-55°C ~ 100°C
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HCPL-0500#060 is determined by the following critical parameters:

Isolation Voltage: Minimum 3750Vrms required for direct substitution
Output Configuration: Transistor with Base output mandatory
Package Type: 8-SOIC (0.154", 3.90mm Width) for PCB compatibility
Number of Channels: Single channel (1) required
Current Transfer Ratio: Minimum 5% @ 16mA
Output Voltage Rating: Minimum 20V
Output Current: 8mA per channel
Input Type: DC input
Mounting: Surface Mount

Substitutes are classified into two categories:

Parametric Equivalents: Parts meeting all critical parameters with identical or superior electrical specifications and active product status.

MFR Recommended Alternatives: Parts with comparable functionality but variations in isolation voltage, operating temperature range, or turn-on/turn-off timing that may require application verification.

Parameter Comparison

Parameter	HCPL-0500#060	HCPL-0500-000E	HCPL0500 (onsemi)	SFH6315T	HCPL-0500
Manufacturer	Broadcom Limited	Broadcom Limited	onsemi	Vishay Semiconductor Opto Division	Broadcom Limited
Product Status	Discontinued	Active	Active	Active	Active
Voltage - Isolation	3750Vrms	3750Vrms	2500Vrms	4000Vrms	3750Vrms
Current Transfer Ratio (Min)	5% @ 16mA	5% @ 16mA	7% @ 16mA	7% @ 16mA	5% @ 16mA
Current Transfer Ratio (Max)	—	—	50% @ 16mA	50% @ 16mA	—
Turn On / Turn Off Time (Typ)	200ns, 1.3µs	200ns, 1.3µs	450ns, 500ns	500ns, 500ns	200ns, 1.3µs
Output Type	Transistor with Base	Transistor with Base	Transistor with Base	Transistor with Base	Transistor with Base
Voltage - Output (Max)	20V	20V	20V	25V	20V
Current - Output / Channel	8mA	8mA	8mA	8mA	8mA
Voltage - Forward (Vf) (Typ)	1.5V	1.5V	1.45V	1.6V	1.5V
Current - DC Forward (If) (Max)	25mA	25mA	25mA	25mA	25mA
Operating Temperature	-55°C ~ 100°C	-55°C ~ 100°C	-40°C ~ 85°C	-55°C ~ 100°C	-55°C ~ 100°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

HCPL-0500-000E (Broadcom Limited): Direct parametric equivalent with identical electrical specifications and active product status. Recommended as the primary replacement for HCPL-0500#060. Achieves ROHS3 compliance, addressing environmental regulatory requirements. Tube packaging available.

HCPL-0500 (Broadcom Limited): Parametric equivalent with identical electrical specifications and active product status. Offers highest inventory availability (35,200 pcs). Maintains RoHS non-compliant status consistent with original part. Suitable for applications without RoHS compliance mandates.

SFH6315T (Vishay Semiconductor Opto Division): MFR recommended alternative with superior isolation voltage (4000Vrms vs. 3750Vrms) and higher maximum output voltage (25V vs. 20V). Slower switching response (500ns turn-on vs. 200ns). Active product status with ROHS3 compliance. Appropriate for applications requiring enhanced isolation margin and regulatory compliance.

HCPL0500 (onsemi): MFR recommended alternative with reduced isolation voltage (2500Vrms vs. 3750Vrms) and narrower operating temperature range (-40°C ~ 85°C vs. -55°C ~ 100°C). Slower switching response (450ns turn-on vs. 200ns). Not suitable for applications requiring 3750Vrms isolation or extended temperature operation.

Frequently Asked Questions (FAQ)

Q: Can HCPL0500 (onsemi) replace HCPL-0500#060 directly?

A: No. The onsemi HCPL0500 provides only 2500Vrms isolation versus the required 3750Vrms. This 1250Vrms reduction exceeds acceptable substitution margins for isolation-critical applications. Additionally, the operating temperature range is restricted to -40°C ~ 85°C, limiting use in extended temperature environments.

Q: What is the primary advantage of HCPL-0500-000E over HCPL-0500?

A: HCPL-0500-000E maintains identical electrical specifications while achieving ROHS3 compliance. Both are Broadcom products with active status. Selection depends on regulatory requirements: HCPL-0500-000E for RoHS-mandated applications, HCPL-0500 for legacy or non-regulated designs.

Q: Is SFH6315T a suitable substitute despite different switching times?

A: SFH6315T is functionally compatible with identical package, output configuration, and channel count. The 300ns increase in turn-on time (500ns vs. 200ns) may affect high-frequency switching applications. The superior isolation voltage (4000Vrms) and ROHS3 compliance make it suitable for applications where switching speed is not critical and regulatory compliance is required.

Q: Are all substitutes pin-compatible with HCPL-0500#060?

A: All listed substitutes use the 8-SOIC (0.154", 3.90mm Width) package with identical pinout for single-channel transistor-output optoisolators. PCB footprints are directly compatible.

Q: What packaging options are available for substitutes?

A: HCPL-0500-000E and HCPL-0500 are supplied in Tube packaging. SFH6315T is supplied in Tape & Reel (TR) format. Packaging selection depends on assembly process requirements and order quantities.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message