HCPL-0466#560 Equivalent & Substitute Parts

Part Overview

The HCPL-0466#560 is a logic output optoisolator with open collector Schottky clamped configuration, providing 3750Vrms isolation in an 8-SO Tall surface mount package. This component is designed for applications requiring galvanic isolation with high common mode transient immunity (15kV/µs) and operates across a wide supply voltage range of 4.5V to 30V.

The HCPL-0466#560 is discontinued at DiGi Electronics. Identifying functionally equivalent alternatives is necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

HCPL-0466#560

Broadcom LimitedIn Stock: 1084HCPL-0466#560 Datasheet

Current PartRFQ

HCPL-0466-560E

Broadcom LimitedIn Stock: 1602HCPL-0466-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-0466#560 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms
• Common Mode Transient Immunity: 15kV/µs minimum
• Output Configuration: Open Collector, Schottky Clamped
• Number of Channels: 1
• Input Type: DC
• Output Current: 15 mA per channel
• Propagation Delay: tpLH ≤ 550ns, tpHL ≤ 400ns
• Supply Voltage Range: 4.5V ~ 30V
• Package: 8-SOIC (0.154", 3.90mm Width) / 8-SO Tall
• Operating Temperature Range: -40°C ~ 100°C

The HCPL-0466-560E meets all electrical and mechanical specifications required for direct substitution. The primary distinction is packaging format (Tape & Reel versus bulk) and product status (Active versus Discontinued).

Parameter Comparison

Engineering Selection Recommendations

The HCPL-0466-560E is the direct functional equivalent of the HCPL-0466#560. Both parts share identical electrical specifications and mechanical packaging. The HCPL-0466-560E is currently in active production status, whereas the HCPL-0466#560 is discontinued.

For new designs and production applications, the HCPL-0466-560E is the appropriate selection. This part offers ROHS3 compliance, addressing regulatory requirements that the original HCPL-0466#560 does not meet. The packaging format difference (Tape & Reel for the -560E variant) is a supply chain consideration rather than a functional distinction and is standard for active production components.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-0466-560E be used as a direct replacement for the HCPL-0466#560 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. The 8-SO Tall package dimensions, isolation voltage, CMTI rating, output configuration, and timing characteristics are equivalent. No circuit modifications are required.

Q: What is the difference between HCPL-0466#560 and HCPL-0466-560E?

A: The primary differences are product status and compliance certification. The HCPL-0466#560 is discontinued and RoHS non-compliant. The HCPL-0466-560E is in active production and ROHS3 compliant. The packaging format differs (bulk versus Tape & Reel), but this does not affect electrical performance or board-level compatibility.

Q: Are there any pin configuration differences between these parts?

A: No. Both parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pin assignments. PCB layouts and footprints are fully compatible.

Q: Does the Tape & Reel packaging of the HCPL-0466-560E affect performance?

A: No. Tape & Reel is a supply format for automated assembly. The component itself is identical to bulk-packaged versions. Electrical and mechanical specifications remain unchanged.

Q: What compliance certifications apply to each part?

A: The HCPL-0466#560 is RoHS non-compliant. The HCPL-0466-560E is ROHS3 compliant. Both parts are REACH Unaffected and classified as EAR99 for export control purposes.