HCPL-0211#560 Equivalent & Substitute Parts

Part Overview

The HCPL-0211#560 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed isolation applications requiring 3750Vrms isolation voltage. This component features push-pull totem pole output configuration with 5MBd data rate capability and is housed in an 8-SOIC surface mount package.

The HCPL-0211#560 is discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

HCPL-0211#560

Broadcom LimitedIn Stock: 890HCPL-0211#560 Datasheet

Current PartRFQ

HCPL-0211-560E

Broadcom LimitedIn Stock: 6111HCPL-0211-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-0211#560 is determined by strict equivalence across the following critical parameters:

• Isolation voltage rating: 3750Vrms
• Output configuration: Push-pull totem pole
• Data rate: 5MBd minimum
• Output current per channel: 25 mA
• Common mode transient immunity: 5kV/µs and 10kV/µs
• Supply voltage range: 4.5V ~ 20V
• Package type: 8-SOIC surface mount
• Channel count: Single channel (1)
• Input type: DC

The HCPL-0211-560E meets all these parameters and qualifies as a direct substitute. Both parts share the same base product number (HCPL-0211) and are manufactured by Broadcom Limited.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-0211-560E is the direct substitute for the HCPL-0211#560. Both components are manufactured by Broadcom Limited and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction between these parts is product status and regulatory compliance. The HCPL-0211#560 is discontinued and carries RoHS non-compliant status. The HCPL-0211-560E is currently active in production and meets ROHS3 compliance requirements, making it the preferred selection for new designs and ongoing production requirements.

Both parts are REACH Unaffected and carry EAR99 ECCN classification. Moisture sensitivity level is identical at MSL 1 (Unlimited) for both variants.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-0211-560E be used as a direct replacement for the HCPL-0211#560 in existing designs?

A: Yes. The HCPL-0211-560E is electrically and mechanically identical to the HCPL-0211#560. All electrical parameters, timing specifications, and package dimensions are equivalent. No circuit modifications are required.

Q: What is the difference between HCPL-0211#560 and HCPL-0211-560E?

A: The primary differences are product status and RoHS compliance. The HCPL-0211#560 is discontinued and RoHS non-compliant. The HCPL-0211-560E is active production and ROHS3 compliant. Electrical and mechanical specifications are identical.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use the 8-SOIC (0.154", 3.90mm Width) surface mount package with identical pinout and mechanical dimensions.

Q: What inventory status should be considered when selecting between these parts?

A: The HCPL-0211#560 has 796 pieces in stock but is discontinued. The HCPL-0211-560E has 6100 pieces in stock and is actively produced. For ongoing supply assurance, the HCPL-0211-560E is the appropriate selection.

Q: Are regulatory certifications identical between these parts?

A: Both parts are REACH Unaffected and carry EAR99 ECCN classification. The HCPL-0211-560E additionally meets ROHS3 compliance, while the HCPL-0211#560 is RoHS non-compliant.