HC2E-L-DC6V-F Equivalent & Substitute Parts

Part Overview

The HC2E-L-DC6V-F is a general purpose relay manufactured by Panasonic Electric Works, featuring a DPDT (2 Form C) contact configuration with 6VDC coil voltage and 3A contact rating. This relay is designed for socketable mounting with a lighted indicator and fully sealed construction. The product is currently obsolete, making identification of compatible substitute parts essential for system maintenance and component replacement in existing applications.

Substiute Parts

HC2E-L-DC6V-F

Panasonic Electric WorksIn Stock: 973HC2E-L-DC6V-F Datasheet

Current PartRFQ

MY2N DC6 (S)

Omron Automation and SafetyIn Stock: 1056MY2N DC6 (S) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HC2E-L-DC6V-F is determined by the following critical parameters:

• Coil voltage: 6VDC (exact match required)
• Contact form: DPDT (2 Form C) (exact match required)
• Mounting type: Socketable (exact match required)
• Termination style: Plug In configuration (exact match required)
• Must operate voltage: 4.8 VDC (exact match required)
• Must release voltage: 0.6 VDC (exact match required)
• Operate and release time: 20 ms each (exact match required)

The MY2N DC6 (S) manufactured by Omron Automation and Safety meets all critical substitution criteria. While the contact rating differs (5A versus 3A), the higher current rating of the substitute part is compatible with applications designed for the original 3A relay, as it provides equal or greater capability within the same electrical and mechanical envelope.

Parameter Comparison

Engineering Selection Recommendations

The MY2N DC6 (S) is the qualified substitute for the obsolete HC2E-L-DC6V-F. Selection is based on:

• Identical coil voltage, contact form, and timing characteristics
• Socketable mounting and plug-in termination compatibility
• Active product status with current manufacturing support
• RoHS compliance certification of the substitute part
• Higher contact current rating (5A) provides margin above the original 3A specification
• Extended operating temperature range (-55°C ~ 70°C) exceeds the original specification

Frequently Asked Questions (FAQ)

Q: Can the MY2N DC6 (S) be used as a direct replacement for the HC2E-L-DC6V-F?

A: Yes. Both relays share identical coil voltage, contact form, timing characteristics, and socketable mounting configuration. The substitute part is electrically and mechanically compatible.

Q: Why does the MY2N DC6 (S) have a higher current rating (5A vs 3A)?

A: The higher contact rating of the substitute part is compatible with applications designed for the original 3A relay. The increased current capacity does not affect operation in circuits designed for lower current levels.

Q: Are there differences in switching voltage capability?

A: The MY2N DC6 (S) supports both 250VAC and 125VDC switching, while the HC2E-L-DC6V-F specifies 250VAC maximum. The substitute part provides expanded voltage switching capability.

Q: What is the significance of the RoHS compliance status?

A: The MY2N DC6 (S) is RoHS compliant, meeting current environmental and regulatory requirements. The original HC2E-L-DC6V-F RoHS status is not specified in available documentation.

Q: Are the coil resistance values equivalent?

A: Yes. The coil resistance values are nearly identical (40 Ohms vs 39.8 Ohms), ensuring equivalent coil current draw and circuit behavior.

Q: Does the extended operating temperature range of the substitute affect compatibility?

A: No. The MY2N DC6 (S) operating range (-55°C ~ 70°C) encompasses the original specification (-40°C ~ 60°C), providing equal or superior performance across all specified operating conditions.