HAF1002-90STL-E MOSFET P-Channel Equivalent & Substitute Parts

Part Overview

The HAF1002-90STL-E is an active P-Channel MOSFET manufactured by Renesas Electronics Corporation, rated for 60V drain-to-source voltage with 15A continuous drain current at 25°C. This device is designed for surface mount applications in the LDPAK package and is RoHS3 compliant with unlimited moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements necessitate alternative electrical or mechanical specifications within the allowed parameter range.

Substiute Parts

HAF1002-90STL-E

Renesas Electronics CorporationIn Stock: 1024HAF1002-90STL-E Datasheet

Current PartRFQ

RSJ151P10TL

Rohm SemiconductorIn Stock: 3035RSJ151P10TL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HAF1002-90STL-E is determined by the following critical parameters:

Electrical Compatibility Criteria:

• FET Type: P-Channel topology must be maintained
• Technology: MOSFET (Metal Oxide) construction required
• Drain to Source Voltage (Vdss): Substitute must equal or exceed 60V rating
• Current - Continuous Drain (Id): Substitute must support minimum 15A at rated temperature
• Power Dissipation: Substitute must support minimum 50W at case temperature (Tc)
• Operating Temperature: Substitute must support 150°C junction temperature

Mechanical Compatibility Criteria:

• Mounting Type: Surface Mount required
• Package compatibility: Substitute package must be compatible with PCB layout and thermal requirements

Compliance Criteria:

• RoHS3 Compliance required
• Moisture Sensitivity Level: MSL 1 (Unlimited) required

The RSJ151P10TL from Rohm Semiconductor meets all substitution criteria with enhanced electrical specifications (100V Vdss, 120 mOhm Rds On @ 15A, 10V) and maintains full compliance with RoHS3 and MSL 1 requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: HAF1002-90STL-E

The HAF1002-90STL-E remains the primary selection when available. This part is actively manufactured by Renesas Electronics Corporation with 1009 units in stock. It is RoHS3 compliant and carries MSL 1 (Unlimited) rating, suitable for standard manufacturing environments without moisture sensitivity constraints.

Substitute Part: RSJ151P10TL

The RSJ151P10TL from Rohm Semiconductor is a qualified substitute when the primary part is unavailable. This part meets all mandatory electrical and mechanical criteria:

• Maintains P-Channel MOSFET topology with identical drive voltage specifications (4V, 10V)
• Exceeds minimum voltage rating (100V vs. 60V required)
• Supports required 15A continuous drain current
• Delivers 50W power dissipation at case temperature
• Operates at 150°C junction temperature
• Maintains RoHS3 compliance and MSL 1 (Unlimited) rating
• Actively manufactured with 2947 units in stock

Package Consideration:

The RSJ151P10TL uses TO-263-3 (D2PAK) package versus the HAF1002-90STL-E LDPAK package. PCB layout modifications are required for package substitution. Both packages are surface mount with thermal tab designs suitable for 50W power dissipation applications.

Frequently Asked Questions (FAQ)

Q: Can the RSJ151P10TL directly replace the HAF1002-90STL-E without PCB modifications?

A: No. The RSJ151P10TL uses TO-263-3 (D2PAK) package while the HAF1002-90STL-E uses SC-83 (LDPAK) package. Pin layouts and footprints differ. PCB layout modifications are required for physical and electrical integration.

Q: What are the key electrical differences between these parts?

A: The RSJ151P10TL has a higher Vdss rating (100V vs. 60V) and slightly higher Rds On (120 mOhm @ 15A, 10V vs. 90 mOhm @ 7.5A, 10V). Both parts support 15A continuous drain current and 50W power dissipation at case temperature. The RSJ151P10TL has wider gate voltage tolerance (±20V vs. +3V, -16V).

Q: Are both parts RoHS3 compliant?

A: Yes. Both the HAF1002-90STL-E and RSJ151P10TL are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the difference between Ta and Tc temperature ratings?

A: Ta refers to ambient temperature rating, while Tc refers to case temperature rating. The HAF1002-90STL-E specifies 15A @ Ta (ambient), while the RSJ151P10TL specifies 15A @ Tc (case). Both parts operate at 150°C maximum junction temperature.

Q: Can I use the RSJ151P10TL in a circuit designed for 60V operation?

A: Yes. The RSJ151P10TL is rated for 100V Vdss, which exceeds the 60V requirement. It operates safely in circuits designed for 60V maximum drain-to-source voltage.

Q: What is the gate charge difference between these parts?

A: The RSJ151P10TL specifies gate charge (Qg) of 64 nC @ 10V. The HAF1002-90STL-E does not provide gate charge specification in the available data. Gate charge affects switching speed and driver requirements in high-frequency applications.

Q: Are there inventory differences between these parts?

A: Yes. The HAF1002-90STL-E has 1009 units in stock, while the RSJ151P10TL has 2947 units in stock. The RSJ151P10TL offers greater availability for high-volume production requirements.