HA9P5104-9 Equivalent & Substitute Parts Reference

Part Overview

The HA9P5104-9 is a general purpose operational amplifier integrated circuit manufactured by Renesas Electronics Corporation, configured as a 4-circuit device in 16-SOIC surface mount packaging. This part is classified as obsolete, indicating discontinuation from the manufacturer. Identification of equivalent and substitute components is necessary to support ongoing system maintenance, design updates, and procurement continuity for applications currently utilizing this device.

Key Parameters

Parameter	Value
Manufacturer Part Number	HA9P5104-9
Manufacturer	Renesas Electronics Corporation
Category	Linear, Amplifiers
Amplifier Type	General Purpose
Number of Circuits	4
Package / Case	16-SOIC (0.295", 7.50mm Width)
Mounting Type	Surface Mount
Slew Rate	3 V/µs
Gain Bandwidth Product	8 MHz
Current - Input Bias	130 nA
Voltage - Input Offset	500 µV
Current - Supply	5 mA
Current - Output / Channel	15 mA
Voltage - Supply Span (Min)	10 V
Voltage - Supply Span (Max)	36 V
Operating Temperature	-40°C ~ 85°C
Product Status	Obsolete
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute components for the HA9P5104-9 are selected based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

Critical Matching Parameters:

Number of circuits: 4 (quad configuration required)
Package type: 16-SOIC surface mount form factor
Mounting type: Surface mount
Output current per channel: 15 mA minimum
Supply voltage range: Minimum 10 V to maximum 36 V overlap required
Operating temperature range: -40°C to 85°C preferred for full compatibility

Substitution Categories:

Category 1: General Purpose Amplifiers (Direct Functional Equivalents) Parts AD704ARZ-16, AD704ARZ-16-REEL, AD704JRZ-16, and AD704JRZ-16-REEL from Analog Devices Inc. are general purpose 4-circuit operational amplifiers in 16-SOIC packaging. These devices maintain the same amplifier type classification and circuit count. All Category 1 substitutes are RoHS3 compliant and carry active product status.

Category 2: J-FET Amplifiers (Enhanced Performance Alternatives) Parts LT1058ISW#PBF, LT1058ISW#TRPBF, LT1058SW#PBF, and LT1058SW#TRPBF from Analog Devices Inc. are J-FET operational amplifiers with 4 circuits in 16-SOIC packaging. These devices offer superior input bias current performance (10 pA versus 130 nA) and higher slew rate (13 V/µs versus 3 V/µs), suitable for applications requiring lower input current characteristics.

Category 3: High-Speed General Purpose Amplifiers (Performance Enhancement) Part OP467GSZ and OP467GSZ-REEL from Analog Devices Inc. are general purpose 4-circuit amplifiers in 16-SOIC packaging with significantly enhanced bandwidth (28 MHz versus 8 MHz) and slew rate (350 V/µs versus 3 V/µs). These devices are suitable for applications requiring higher frequency response.

Parameter Comparison

Parameter	HA9P5104-9	AD704ARZ-16 / AD704ARZ-16-REEL	AD704JRZ-16 / AD704JRZ-16-REEL	LT1058ISW#PBF / LT1058ISW#TRPBF	LT1058SW#PBF / LT1058SW#TRPBF	OP467GSZ / OP467GSZ-REEL
Manufacturer	Renesas	Analog Devices	Analog Devices	Analog Devices	Analog Devices	Analog Devices
Amplifier Type	General Purpose	General Purpose	General Purpose	J-FET	J-FET	General Purpose
Number of Circuits	4	4	4	4	4	4
Package / Case	16-SOIC	16-SOIC	16-SOIC	16-SOIC	16-SOIC	16-SOIC
Slew Rate	3 V/µs	0.1 V/µs	0.1 V/µs	13 V/µs	13 V/µs	350 V/µs
Gain Bandwidth Product	8 MHz	800 kHz	800 kHz	5 MHz	5 MHz	28 MHz
Current - Input Bias	130 nA	100 pA	100 pA	10 pA	10 pA	150 nA
Voltage - Input Offset	500 µV	50 µV	50 µV	350 µV	350 µV	200 µV
Current - Supply	5 mA	1.5 mA (x4)	1.5 mA (x4)	1.7 mA (x4)	1.7 mA (x4)	8 mA (x4)
Current - Output / Channel	15 mA	15 mA	15 mA	Not specified	Not specified	Not specified
Voltage - Supply Span (Min)	10 V	4 V	4 V	20 V	20 V	9 V
Voltage - Supply Span (Max)	36 V	36 V	36 V	36 V	36 V	36 V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	0°C ~ 70°C	-40°C ~ 85°C	0°C ~ 70°C	-40°C ~ 85°C
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount

Engineering Selection Recommendations

For Direct Replacement with Minimum Design Impact:

AD704ARZ-16 and AD704ARZ-16-REEL are recommended as primary substitutes for applications where the HA9P5104-9 operates within the 4 V to 36 V supply range. These devices maintain general purpose amplifier classification, identical circuit count, and matching 16-SOIC packaging. Both variants are RoHS3 compliant and carry active product status, ensuring long-term availability and regulatory compliance. The AD704ARZ-16 is supplied in tube packaging, while AD704ARZ-16-REEL is supplied in cut tape and Digi-Reel format for automated assembly.

For Extended Temperature Range Applications:

AD704ARZ-16 and AD704ARZ-16-REEL support the full -40°C to 85°C operating temperature range matching the HA9P5104-9. AD704JRZ-16 and AD704JRZ-16-REEL are limited to 0°C to 70°C operation and are suitable only for applications not requiring the extended low-temperature specification.

For Applications Requiring Lower Input Bias Current:

LT1058ISW#PBF and LT1058ISW#TRPBF (operating -40°C to 85°C) or LT1058SW#PBF and LT1058SW#TRPBF (operating 0°C to 70°C) provide J-FET input stages with input bias current of 10 pA, approximately 13,000 times lower than the HA9P5104-9. These devices are suitable for high-impedance signal conditioning applications. Minimum supply voltage requirement is 20 V, which exceeds the HA9P5104-9 minimum of 10 V.

For Applications Requiring Higher Bandwidth and Slew Rate:

OP467GSZ and OP467GSZ-REEL provide general purpose amplifier functionality with 28 MHz gain bandwidth product and 350 V/µs slew rate, suitable for applications requiring enhanced frequency response. Minimum supply voltage is 9 V, compatible with the HA9P5104-9 specification. Both variants support -40°C to 85°C operation and are RoHS3 compliant.

Regulatory and Compliance Considerations:

All recommended substitute parts are RoHS3 compliant and carry active product status from Analog Devices Inc., ensuring regulatory alignment and manufacturing continuity. The HA9P5104-9 is RoHS non-compliant; substitution with compliant alternatives supports updated design standards and procurement policies.

Frequently Asked Questions (FAQ)

Q: Can AD704JRZ-16 be used as a direct replacement for HA9P5104-9 in all applications?

A: AD704JRZ-16 is mechanically and functionally compatible in 16-SOIC packaging with matching circuit count and output current specifications. However, the operating temperature range is limited to 0°C to 70°C, compared to the HA9P5104-9 range of -40°C to 85°C. Use AD704JRZ-16 only in applications not requiring extended low-temperature operation below 0°C.

Q: What is the key difference between AD704ARZ-16 and AD704ARZ-16-REEL?

A: Both parts are electrically identical AD704 base devices with identical electrical specifications. The difference is packaging format: AD704ARZ-16 is supplied in tube packaging for manual handling and small-quantity applications, while AD704ARZ-16-REEL is supplied in cut tape and Digi-Reel format optimized for automated pick-and-place assembly equipment.

Q: Why do LT1058 devices require a minimum 20 V supply when HA9P5104-9 operates at 10 V minimum?

A: LT1058 devices use J-FET input stages requiring higher internal bias voltages for proper operation. The 20 V minimum supply specification is an electrical requirement of the J-FET input architecture. Applications operating at 10 V to 19 V supply voltage cannot use LT1058 substitutes.

Q: Are all substitute parts RoHS compliant?

A: Yes. All recommended substitute parts from Analog Devices Inc. carry RoHS3 compliance certification. The original HA9P5104-9 is RoHS non-compliant. Substitution with compliant alternatives supports current environmental and regulatory requirements.

Q: Can OP467GSZ be used in applications sensitive to slew rate?

A: OP467GSZ has a slew rate of 350 V/µs, approximately 117 times higher than the HA9P5104-9 at 3 V/µs. In applications with sensitive analog signal paths or precision measurement circuits, the higher slew rate may introduce transient distortion or increased noise coupling. Evaluate circuit performance through testing or simulation before substitution in precision applications.

Q: What is the inventory status of substitute parts?

A: AD704ARZ-16 has 1,726 units in stock; AD704ARZ-16-REEL has 2,100 units; AD704JRZ-16 has 695,927 units; AD704JRZ-16-REEL has 4,883 units; LT1058ISW#PBF has 1,429 units; LT1058ISW#TRPBF has 2,100 units; LT1058SW#PBF has 1,494 units; LT1058SW#TRPBF has 2,200 units; OP467GSZ has 2,025 units; OP467GSZ-REEL has 3,262 units. All parts are available as new original stock.

Q: Is the 16-SOIC package identical across all substitute parts?

A: Yes. All substitute parts use 16-SOIC (0.295", 7.50mm width) surface mount packaging, ensuring mechanical compatibility with existing PCB layouts and assembly processes designed for the HA9P5104-9.

Q: What is the moisture sensitivity level (MSL) for substitute parts?

A: AD704 and LT1058 devices carry MSL 1 (Unlimited), identical to the HA9P5104-9. OP467GSZ and OP467GSZ-REEL carry MSL 3 (168 Hours), requiring controlled storage and handling procedures during manufacturing.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message