HA6050P-10 Equivalent & Substitute Parts

Part Overview

The HA6050P-10 is a solid state relay (SSR) manufactured by Sensata-Crydom, classified as a SPST-NO (1 Form A) hockey puck configuration. This component functions as an AC output relay with a 50A load capacity across a 48V to 660V operating range. The device is actively produced and RoHS compliant, making it suitable for industrial switching applications requiring high current AC control. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

HA6050P-10

Sensata-CrydomIn Stock: 1079HA6050P-10 Datasheet

Current PartRFQ

84137321N

CrouzetIn Stock: 91084137321N Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HA6050P-10 is determined by electrical and mechanical parameter equivalence. The critical parameters governing substitution are:

• Circuit Configuration: SPST-NO (1 Form A) topology
• Output Type: AC switching capability
• Load Current Rating: 50 A minimum
• Load Voltage Range: 48 V to 660 V compatibility
• Input Voltage Range: Minimum 90VAC to 280VAC operation
• Package / Case: Hockey Puck form factor
• Mounting Type: Chassis Mount configuration
• Termination Style: Screw Terminal interface
• Compliance: RoHS Compliant status

The Crouzet 84137321N meets all critical electrical parameters with the exception of input voltage range (90 ~ 260VAC versus 90 ~ 280VAC on the primary part). This variance represents a 20VAC reduction in maximum input tolerance. Both components maintain identical load current, load voltage range, circuit configuration, output type, package form factor, and mounting methodology.

Parameter Comparison

Engineering Selection Recommendations

Both the HA6050P-10 and 84137321N are active production components with RoHS compliance and MSL Level 1 ratings. Selection between these parts should be based on application-specific input voltage requirements. The HA6050P-10 supports input voltages up to 280VAC, while the 84137321N operates within a 90 ~ 260VAC input range. Applications requiring operation at input voltages between 260VAC and 280VAC necessitate the HA6050P-10. For applications operating within the 90 ~ 260VAC input window, both components are electrically and mechanically equivalent and interchangeable.

Frequently Asked Questions (FAQ)

Q: Are the HA6050P-10 and 84137321N mechanically interchangeable?

A: Yes. Both components feature identical hockey puck package geometry, chassis mount configuration, and screw terminal termination. Physical installation and mounting procedures are identical.

Q: What is the primary difference between these two SSR relays?

A: The input voltage range differs. The HA6050P-10 accepts 90 ~ 280VAC input, while the 84137321N accepts 90 ~ 260VAC input. All other electrical and mechanical parameters are equivalent.

Q: Can the 84137321N replace the HA6050P-10 in all applications?

A: The 84137321N can replace the HA6050P-10 only in applications where the input voltage does not exceed 260VAC. Applications requiring input voltages between 260VAC and 280VAC require the HA6050P-10.

Q: Do both relays support the same load current and voltage specifications?

A: Yes. Both components are rated for 50A load current and operate across a 48V to 660V load voltage range.

Q: Are both components RoHS compliant?

A: Yes. Both the HA6050P-10 and 84137321N are RoHS compliant with MSL Level 1 moisture sensitivity ratings.

Q: What termination method do these relays use?

A: Both components utilize screw terminal termination for load and control connections.