H9066-01 Equivalent & Substitute Parts

Part Overview

The H9066-01 is a Terminal Turret Connector manufactured by Harwin Inc., classified as a single-end, fork-type hollow turret terminal with tin contact finish. This component is designed for through-hole mounting applications with swage termination. The part is currently listed as obsolete, which necessitates identification of active equivalent alternatives to maintain design continuity and ensure procurement availability for new production runs or repair applications.

Substiute Parts

H9066-01

Harwin Inc.In Stock: 939H9066-01 Datasheet

Current PartRFQ

H9067-01

Harwin Inc.In Stock: 714H9067-01 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The H9067-01 qualifies as a direct substitute for the H9066-01 based on the following critical parameters that determine functional and mechanical compatibility:

Matching Parameters:

• Terminal Type: Single End, Fork, Hollow (identical)
• Length - Above Board: 0.187" (4.75mm) (identical)
• Mounting Type: Through Hole (identical)
• Termination Method: Swage (identical)
• Flange Diameter: 0.125" (3.18mm) (identical)
• Staking Side OD: 0.059" ~ 0.060" (1.50mm ~ 1.52mm) (identical)
• Staking Side ID: 0.042" ~ 0.043" (1.07mm ~ 1.09mm) (identical)
• Mounting Hole Diameter: 0.060" ~ 0.063" (1.52mm ~ 1.60mm) (identical)
• Contact Material: Brass Alloy (identical)
• Contact Finish: Tin (identical)
• Insulation: Non-Insulated (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)
• REACH Status: REACH Unaffected (identical)

Differing Parameters:

• Length - Below Flange: H9066-01 = 0.094" (2.39mm); H9067-01 = 0.125" (3.18mm)
• Length - Overall: H9066-01 = 0.281" (7.14mm); H9067-01 = 0.313" (7.95mm)
• Board Thickness: H9066-01 = 0.063" (1.60mm); H9067-01 = 0.094" (2.39mm)
• Product Status: H9066-01 = Obsolete; H9067-01 = Active

The H9067-01 is designed for thicker printed circuit boards (0.094" versus 0.063"), resulting in increased below-flange length and overall length. This substitution is valid when the application accommodates the thicker board specification or when board thickness is not a constraint.

Parameter Comparison

Engineering Selection Recommendations

The H9067-01 is the active equivalent substitute for the obsolete H9066-01. Both components maintain identical electrical and mechanical specifications for all critical turret terminal parameters, including terminal geometry, contact material, contact finish, and mounting interface dimensions.

The primary design difference is board thickness accommodation: the H9066-01 is specified for 0.063" (1.60mm) board thickness, while the H9067-01 is specified for 0.094" (2.39mm) board thickness. This results in proportionally increased below-flange length and overall length for the H9067-01.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current production requirements. The H9067-01 is currently in active production status with documented inventory availability, making it the appropriate selection for new designs or replacement procurement where the thicker board specification is compatible with the application.

Frequently Asked Questions (FAQ)

Q: Can H9067-01 be used as a direct replacement for H9066-01 in existing designs?

A: The H9067-01 is functionally equivalent for turret terminal operation. Compatibility depends on printed circuit board thickness. The H9066-01 is designed for 0.063" (1.60mm) board thickness, while the H9067-01 is designed for 0.094" (2.39mm) board thickness. If your application uses 0.094" board thickness, the H9067-01 is a direct substitute. If your application uses 0.063" board thickness, board-level mechanical fit must be evaluated.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by: terminal type (single end, fork, hollow), length above board (0.187"), mounting type (through hole), termination method (swage), flange diameter (0.125"), staking dimensions (OD 0.059"–0.060", ID 0.042"–0.043"), mounting hole diameter (0.060"–0.063"), contact material (brass alloy), contact finish (tin), and insulation type (non-insulated). Board thickness is a secondary parameter that affects overall and below-flange length.

Q: Are there any compliance or regulatory differences between H9066-01 and H9067-01?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, MSL 1 (unlimited), and ECCN/HTSUS classifications. Regulatory requirements are satisfied by either part.

Q: What is the packaging difference between these parts?

A: The H9066-01 is supplied in standard packaging, while the H9067-01 is supplied in bulk packaging. Packaging format does not affect component functionality or electrical performance.

Q: Why is H9066-01 listed as obsolete?

A: The H9066-01 has been superseded by the H9067-01 in Harwin Inc.'s active product portfolio. The H9067-01 provides equivalent functionality with support for thicker printed circuit board applications, making it the current standard offering for this terminal type.