H7N1002LSTL-E Equivalent & Substitute Parts

Part Overview

The H7N1002LSTL-E is an N-Channel MOSFET manufactured by Renesas Electronics Corporation, rated for 100V drain-to-source voltage with 75A continuous drain current at 25°C. This device is housed in a Surface Mount LDPAK (SC-83) package and is designed for high-current switching applications requiring compact form factors. The part is Active in product status and RoHS3 compliant.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining functional compatibility in the target application. Substitution becomes necessary due to inventory availability, supply chain considerations, or application-specific packaging requirements.

Substiute Parts

H7N1002LSTL-E

Renesas Electronics CorporationIn Stock: 767H7N1002LSTL-E Datasheet

Current PartRFQ

PSMN015-100B,118

Nexperia USA Inc.In Stock: 2978PSMN015-100B,118 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the H7N1002LSTL-E is based on electrical parameter equivalence within the following criteria:

Electrical Compatibility Requirements:

• Drain-to-Source Voltage (Vdss): 100V minimum
• Continuous Drain Current (Id): 75A minimum at rated temperature
• Gate Voltage (Vgs): ±20V maximum rating
• N-Channel MOSFET technology

Mechanical Compatibility Considerations:

• Surface Mount technology
• Package footprint and thermal characteristics must support application requirements

Compliance Requirements:

• RoHS3 compliance
• REACH unaffected status
• Active product status

The PSMN015-100B,118 from Nexperia USA Inc. meets these electrical and compliance criteria, though it features a different package type (D2PAK versus LDPAK) and enhanced thermal performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

H7N1002LSTL-E (Renesas Electronics Corporation)

Select this part when LDPAK (SC-83) package form factor is required for the target application. The device is Active in product status with full RoHS3 compliance and REACH unaffected status. Current inventory availability is 737 pieces. This part is suitable for applications where compact surface mount packaging is prioritized.

PSMN015-100B,118 (Nexperia USA Inc.)

Select this part when D2PAK (TO-263-3) package form factor is compatible with the application and enhanced thermal performance is beneficial. The device is Active in product status with full RoHS3 compliance and REACH unaffected status. Current inventory availability is 2893 pieces. The D2PAK package provides superior thermal dissipation (300W maximum power dissipation versus 100W) and an extended operating temperature range (—55°C to 175°C versus —55°C to 150°C). Gate charge is lower (90 nC versus 155 nC), resulting in faster switching characteristics.

Both parts meet the core electrical requirements of 100V Vdss and 75A continuous drain current. Selection between these parts depends on package compatibility with the printed circuit board layout and thermal management requirements of the specific application.

Frequently Asked Questions (FAQ)

Q: Can the PSMN015-100B,118 directly replace the H7N1002LSTL-E in all applications?

A: Electrical substitution is valid based on Vdss, Id, and Vgs ratings. However, package compatibility must be confirmed. The H7N1002LSTL-E uses LDPAK (SC-83) while the PSMN015-100B,118 uses D2PAK (TO-263-3). PCB footprint, thermal pad design, and mounting hole patterns differ between these packages. Physical compatibility must be verified before implementation.

Q: What are the key electrical differences between these parts?

A: Both parts share identical Vdss (100V) and Id (75A) ratings. The PSMN015-100B,118 features lower on-state resistance (15 mOhm @ 25A versus 10 mOhm @ 37.5A), lower gate charge (90 nC versus 155 nC), and lower input capacitance (4900 pF versus 9700 pF). The PSMN015-100B,118 also provides higher maximum power dissipation (300W versus 100W) and extended operating temperature range.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the H7N1002LSTL-E and PSMN015-100B,118 are RoHS3 compliant with MSL rating of 1 (Unlimited) and REACH unaffected status.

Q: What is the significance of the lower gate charge in the PSMN015-100B,118?

A: Lower gate charge (90 nC versus 155 nC) results in faster switching transitions when driven by the same gate driver circuit. This reduces switching losses and can improve overall circuit efficiency, particularly in high-frequency switching applications.

Q: How do the package differences affect thermal management?

A: The D2PAK package (PSMN015-100B,118) provides a larger thermal pad and superior heat dissipation characteristics, supporting 300W maximum power dissipation compared to 100W for the LDPAK package (H7N1002LSTL-E). Applications requiring higher power dissipation or improved thermal performance benefit from the D2PAK package.

Q: Are there any temperature rating differences?

A: Yes. The H7N1002LSTL-E operates to 150°C maximum junction temperature, while the PSMN015-100B,118 operates to 175°C. The extended temperature range of the PSMN015-100B,118 provides additional margin in high-temperature environments.

Q: What inventory considerations apply to these parts?

A: The H7N1002LSTL-E has 737 pieces in stock, while the PSMN015-100B,118 has 2893 pieces in stock. Higher inventory availability of the PSMN015-100B,118 may support shorter lead times for high-volume requirements.