H60060-3C Equivalent & Substitute Parts Reference

Part Overview

The H60060-3C is a fuse block cartridge designed for 600V applications with a 60A current rating and 3-circuit configuration. Manufactured by Eaton - Bussmann Electrical Division, this chassis mount component is classified as obsolete. Due to its obsolete status, identifying compatible substitute parts is essential for system maintenance, repair, and component replacement in existing installations.

Substiute Parts

H60060-3C

Eaton - Bussmann Electrical DivisionIn Stock: 996H60060-3C Datasheet

Current PartRFQ

HM60060-3CR

Eaton - Bussmann Electrical DivisionIn Stock: 1146HM60060-3CR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the H60060-3C is determined by the following critical parameters:

• Current Rating: 60 A
• Voltage Rating: 600V
• Number of Circuits: 3
• Fuse Type: Cartridge
• Fuse Size: 1.063" Dia x 5.5" L (27mm x 139.7mm)
• Mounting Type: Chassis Mount
• Termination Style: Box Lug
• Compatibility with Class H(K) and Class R Fuses

The substitute part HM60060-3CR maintains electrical and mechanical compatibility across all critical parameters, enabling direct functional replacement in applications requiring a 600V, 60A, 3-circuit cartridge fuse block with chassis mount configuration.

Parameter Comparison

Engineering Selection Recommendations

The HM60060-3CR is the direct substitute for the H60060-3C. Both components are manufactured by Eaton - Bussmann Electrical Division and share identical electrical ratings (600V, 60A, 3-circuit) and mechanical specifications (cartridge fuse type, chassis mount, box lug termination).

The primary distinction is product status: the H60060-3C is obsolete, while the HM60060-3CR is active and RoHS compliant. The HM60060-3CR is suitable for new installations and replacement applications where compliance with current environmental standards is required.

Both parts carry the same ECCN and HTSUS classifications, confirming regulatory equivalence for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can the HM60060-3CR directly replace the H60060-3C in existing installations?

A: Yes. Both components have identical electrical ratings (600V, 60A, 3-circuit), fuse type (cartridge), and mechanical mounting specifications (chassis mount, box lug termination). Direct substitution is supported without circuit modification.

Q: What is the significance of the HM60060-3CR being RoHS compliant?

A: RoHS compliance indicates the substitute part meets current environmental standards for restricted hazardous substances. This is relevant for new installations and applications subject to environmental regulations, though it does not affect electrical or mechanical compatibility.

Q: Are there packaging differences between the H60060-3C and HM60060-3CR?

A: The H60060-3C is listed with packaging designation "-" (not specified), while the HM60060-3CR is supplied in bulk packaging. Packaging format does not affect component functionality or compatibility.

Q: Do both parts accept the same fuse types?

A: The H60060-3C is specified for use with Class H(K) and Class R fuses. The HM60060-3CR maintains the same fuse block design and cartridge specifications, supporting compatibility with the same fuse classifications.

Q: What is the moisture sensitivity level for these components?

A: The H60060-3C has an MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints. The HM60060-3CR lists MSL as Not Applicable, consistent with the passive nature of fuse block components.