LED Holder H-313C Equivalent & Substitute Parts

Part Overview

The H-313C is an active T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This component is a black nylon standoff with a 0.600" (15.24mm) length, suitable for through-hole PCB applications requiring vertical LED positioning. The part is ROHS3 compliant and carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, allowing for component interchangeability in design and procurement scenarios.

Substiute Parts

H-313C

Bivar Inc.In Stock: 1056H-313C Datasheet

Current PartRFQ

ELM 4-600

Bivar Inc.In Stock: 1069ELM 4-600 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the H-313C are identified based on strict parameter matching within the LED holder category. The primary substitution criteria are:

Critical Matching Parameters:

• LED Type: T1 (3mm)
• Length: 0.600" (15.24mm)
• Color: Black
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Product Status: Active

The ELM 4-600 qualifies as a parametric equivalent because it maintains all critical dimensions, compliance certifications, and operational characteristics. The material difference (PVC versus Nylon) does not affect substitution eligibility, as both materials satisfy the mechanical and environmental requirements for this product category. Both parts are manufactured by Bivar Inc., ensuring consistent quality and design standards.

Parameter Comparison

Engineering Selection Recommendations

Both H-313C and ELM 4-600 are active products with ROHS3 compliance and identical MSL ratings. Selection between these parts should be based on material availability and procurement lead times. The H-313C (Nylon construction) and ELM 4-600 (PVC construction) are functionally equivalent for T1 LED standoff applications with 0.600" standoff height. Both parts maintain the same regulatory compliance status and environmental handling requirements. Inventory availability shows 967 units for H-313C and 1058 units for ELM 4-600, supporting either selection for production requirements.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-600 be used as a direct replacement for H-313C in existing designs?

A: Yes. Both parts maintain identical LED type (T1), length (0.600"), color (Black), RoHS compliance, and MSL ratings. The material difference (PVC versus Nylon) does not affect mechanical or electrical compatibility for LED holder applications.

Q: What is the significance of the material difference between Nylon and PVC?

A: Both Nylon and PVC are suitable polymeric materials for LED holder construction. The material difference does not impact the substitution relationship, as both materials satisfy the mechanical requirements and environmental compliance standards for this product category.

Q: Are both parts subject to the same handling and storage requirements?

A: Yes. Both H-313C and ELM 4-600 carry MSL 1 (Unlimited) ratings, indicating no moisture sensitivity restrictions. Standard component storage practices apply to both parts.

Q: What packaging format is used for both parts?

A: Both parts are supplied in Bag packaging format, suitable for bulk component procurement and assembly operations.

Q: Do both parts comply with current environmental regulations?

A: Yes. Both H-313C and ELM 4-600 are ROHS3 compliant and carry identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications.