H-300C-2-160 LED Holder Equivalent & Substitute Parts

Part Overview

The H-300C-2-160 is a T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This component features a black nylon construction with a 0.475" (12.07mm) length and accommodates two-lead configurations. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design and procurement requirements. Equivalent parts maintain functional compatibility while offering active product status and current manufacturing support.

Key Parameters

Parameter	Value
Manufacturer Part Number	H-300C-2-160
Manufacturer	Bivar Inc.
LED Type	T1
LED Size	3mm
Lead Configuration	2-Lead
Mounting Style	Right-Angle (RA)
Length	0.475" (12.07mm)
Material	Nylon
Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the H-300C-2-160 is determined by the following critical parameters: LED type (T1), LED size (3mm), lead configuration (2-lead), mounting style (right-angle), color (black), and MSL rating (1). Length tolerance is a secondary consideration, with acceptable substitutes ranging from 0.455" to 0.490" (11.56mm to 12.45mm), representing a variance of ±0.020" from the original 0.475" specification.

The primary substitute grouping consists of active ELM 2-series components manufactured by Bivar Inc. These parts maintain identical LED type, size, lead configuration, mounting style, color, and MSL rating. Material composition differs (PVC versus nylon), which does not preclude functional substitution in standard applications. The H-200C-1 represents an alternative from the same manufacturer with reduced length (0.380"), suitable only for applications with relaxed height constraints.

Parameter Comparison

Part Number	Manufacturer	LED Type	LED Size	Length (inches)	Length (mm)	Material	Color	MSL	Product Status	RoHS Status
H-300C-2-160	Bivar Inc.	T1	3mm	0.475"	12.07mm	Nylon	Black	1	Obsolete	Vendor Undefined
ELM 2-12MM	Bivar Inc.	T1	3mm	0.470"	11.94mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-455	Bivar Inc.	T1	3mm	0.455"	11.56mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-460	Bivar Inc.	T1	3mm	0.460"	11.68mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-465	Bivar Inc.	T1	3mm	0.465"	11.81mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-470	Bivar Inc.	T1	3mm	0.470"	11.94mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-475	Bivar Inc.	T1	3mm	0.475"	12.07mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-480	Bivar Inc.	T1	3mm	0.480"	12.19mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-485	Bivar Inc.	T1	3mm	0.485"	12.32mm	PVC	Black	1	Active	ROHS3 Compliant
ELM 2-490	Bivar Inc.	T1	3mm	0.490"	12.45mm	PVC	Black	1	Active	ROHS3 Compliant
H-200C-1	Bivar Inc.	T1	3mm	0.380"	9.65mm	Nylon	Black	1	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitutes (Recommended): The ELM 2-series components, specifically ELM 2-475, ELM 2-480, and ELM 2-485, are the preferred equivalents for the H-300C-2-160. These parts maintain exact dimensional compatibility within acceptable tolerance ranges, with ELM 2-475 providing identical length specification (0.475" / 12.07mm). All ELM 2-series substitutes are active products with ROHS3 compliance certification, ensuring long-term availability and regulatory alignment.

Secondary Substitutes (Length-Variant): ELM 2-470, ELM 2-465, ELM 2-460, ELM 2-455, and ELM 2-12MM are functionally equivalent with minor length variations ranging from 0.455" to 0.470". These components are suitable for applications where LED standoff height tolerance permits ±0.020" deviation from the original specification.

Alternative Material Substitute: The H-200C-1 maintains nylon material composition identical to the original H-300C-2-160 but features reduced length (0.380" / 9.65mm). This component is applicable only to designs with specific height constraints that accommodate the 0.095" reduction.

Compliance Consideration: All recommended substitutes carry ROHS3 compliance certification, whereas the original H-300C-2-160 lists vendor-undefined ROHS status. Substitution with ROHS3-compliant alternatives aligns with current regulatory requirements for electronic component procurement.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-series components directly replace the H-300C-2-160?

A: Yes. ELM 2-series components are direct functional equivalents. All maintain T1 LED type, 3mm LED size, 2-lead configuration, right-angle mounting style, black color, and MSL rating of 1. The primary difference is material composition (PVC versus nylon), which does not affect mechanical or electrical performance in standard LED holder applications.

Q: What is the acceptable length tolerance for substitution?

A: The H-300C-2-160 specifies 0.475" (12.07mm) length. Acceptable substitutes range from 0.455" to 0.490" (11.56mm to 12.45mm), representing a tolerance band of ±0.020". Length selection depends on available PCB or mounting surface clearance in the target application.

Q: Why is ELM 2-475 the closest equivalent?

A: ELM 2-475 provides exact dimensional match to the original H-300C-2-160 at 0.475" (12.07mm) length. This part eliminates height-related design considerations and is the preferred selection when no other constraints exist.

Q: Is the material change from nylon to PVC significant?

A: Material composition differs between the H-300C-2-160 (nylon) and ELM 2-series substitutes (PVC). Both materials are suitable for standard LED holder applications. PVC offers equivalent mechanical stability and electrical insulation properties. Material selection becomes relevant only in applications with specific environmental exposure, chemical compatibility, or temperature requirements beyond standard operating conditions.

Q: Are all recommended substitutes ROHS3 compliant?

A: Yes. All ELM 2-series components and the H-200C-1 carry ROHS3 compliance certification. The original H-300C-2-160 lists vendor-undefined ROHS status. Substitution with ROHS3-compliant alternatives ensures alignment with current regulatory standards for electronic component procurement and end-product compliance.

Q: What inventory status should influence part selection?

A: All recommended ELM 2-series substitutes maintain active product status with substantial inventory availability (677 to 1112 pieces in stock). The H-200C-1 alternative maintains active status with 895 pieces available. Active product status ensures continued manufacturing support and procurement reliability.

Q: Can the H-200C-1 substitute for the H-300C-2-160?

A: The H-200C-1 is functionally equivalent but features reduced length (0.380" versus 0.475"), representing a 0.095" height reduction. This component is suitable only for applications where LED standoff height can accommodate the shorter dimension without affecting circuit board layout or component clearance requirements.

Q: Which substitute should be selected for new designs?

A: For new designs, ELM 2-475 is the recommended selection, providing exact dimensional equivalence to the original specification. If design flexibility permits, ELM 2-480 or ELM 2-485 offer marginally increased height with identical functional performance. All three options maintain active product status and ROHS3 compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message