H-300C-1-100 LED Holder - Equivalent & Substitute Parts

Part Overview

The H-300C-1-100 is a T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs on printed circuit boards. The part is constructed from black nylon with a height of 0.415" (10.54mm) and provides a two-lead mounting configuration. This part has reached obsolete status, necessitating identification of functionally equivalent alternatives that maintain compatibility with existing circuit designs.

Key Parameters

Parameter	H-300C-1-100
LED Type	T1
Mounting Style	Right-Angle (RA)
Lead Configuration	2-Lead
Height	0.415" (10.54mm)
Material	Nylon
Color	Black
Moisture Sensitivity Level	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution for H-300C-1-100 is determined by the following parameters: LED type (T1), mounting style (right-angle), lead configuration (2-lead), material composition (nylon or PVC), color (black), and height within ±0.035" tolerance. All identified substitutes maintain T1 LED compatibility and two-lead configuration. Height variation across the substitute group ranges from 0.380" to 0.430", encompassing the original part's 0.415" specification. Material alternatives include both nylon (original material) and PVC variants, both rated at MSL 1. All substitute parts maintain active product status and ROHS3 compliance where applicable.

Parameter Comparison

Part Number	Manufacturer	LED Type	Height (inches)	Height (mm)	Material	Product Status	RoHS Status	Inventory (Pcs)
H-300C-1-100	Bivar Inc.	T1	0.415"	10.54	Nylon	Obsolete	Vendor Undefined	876
H-200C	Bivar Inc.	T1	0.380"	9.65	Nylon	Active	ROHS3 Compliant	849
922-340	Bivar Inc.	T1	0.400"	10.16	Nylon	Active	ROHS3 Compliant	641
922-341	Bivar Inc.	T1	0.400"	10.16	Nylon	Active	ROHS3 Compliant	1153
922-342	Bivar Inc.	T1	0.400"	10.16	Nylon	Active	ROHS3 Compliant	888
922-343	Bivar Inc.	T1	0.400"	10.16	Nylon	Active	ROHS3 Compliant	1020
ELM 2-11MM	Bivar Inc.	T1	0.430"	10.92	PVC	Active	ROHS3 Compliant	1058
ELM 2-395	Bivar Inc.	T1	0.395"	10.03	PVC	Active	ROHS3 Compliant	722
ELM 2-400	Bivar Inc.	T1	0.400"	10.16	PVC	Active	ROHS3 Compliant	1035
ELM 2-405	Bivar Inc.	T1	0.405"	10.29	PVC	Active	ROHS3 Compliant	694
ELM 2-410	Bivar Inc.	T1	0.410"	10.41	PVC	Active	ROHS3 Compliant	703

Engineering Selection Recommendations

Selection among available substitutes should prioritize parts with active product status. H-200C and the 922-series (922-340, 922-341, 922-342, 922-343) are manufactured from nylon, maintaining material consistency with the original H-300C-1-100. The 922-series offers superior inventory availability with individual quantities exceeding 800 units.

For applications where material composition is not a constraint, the ELM 2-series (ELM 2-395, ELM 2-400, ELM 2-405, ELM 2-410, ELM 2-11MM) provides PVC-based alternatives with active status and ROHS3 compliance. All substitute parts are rated at MSL 1 (Unlimited), maintaining compatibility with moisture sensitivity requirements.

Height variation across the substitute group ranges from 0.380" to 0.430". Applications with tight vertical spacing constraints should select parts within ±0.015" of the original 0.415" height: 922-series at 0.400", ELM 2-400 at 0.400", ELM 2-405 at 0.405", and ELM 2-410 at 0.410".

Frequently Asked Questions (FAQ)

Q: What determines compatibility between H-300C-1-100 and available substitutes? A: Compatibility is established through matching LED type (T1), mounting style (right-angle, 2-lead), and material characteristics (nylon or PVC). All identified substitutes meet these core requirements. Height variation within the group necessitates circuit board layout evaluation to confirm PCB clearance compatibility.

Q: Are material differences between nylon and PVC substitutes significant? A: Both nylon and PVC materials are provided at MSL 1 rating. Material selection depends on application-specific environmental exposure and mechanical stress requirements. Nylon variants (H-200C, 922-series) maintain material consistency with the original H-300C-1-100. PVC variants (ELM 2-series) offer equivalent electrical and thermal performance characteristics.

Q: Which substitute part offers closest dimensional match to H-300C-1-100? A: ELM 2-410 at 0.410" (10.41mm) provides the closest height match to the original 0.415" (10.54mm) specification, with only 0.005" deviation. ELM 2-405 at 0.405" and the 922-series at 0.400" represent alternative matches within ±0.015" tolerance.

Q: Are packaging considerations different among substitute parts? A: The original H-300C-1-100 specifies no documented packaging type. Substitute parts H-200C and the 922-series are supplied in bag packaging. ELM 2-series parts are supplied in bag packaging. Packaging compatibility should be confirmed with procurement requirements.

Q: Do all substitutes maintain equivalent compliance ratings? A: All substitute parts maintain MSL 1 (Unlimited) rating matching the original. Nylon variants lack documented RoHS status information for H-200C, while 922-series and all ELM 2-series parts are ROHS3 Compliant. Application-specific compliance requirements should be verified against final part selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message