Equivalent & Substitute Parts for H25060-1C

Part Overview

The H25060-1C is a fuse block cartridge designed for 250V, 60A single-circuit applications with chassis mount configuration. This component is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component replacement in existing installations. The H25060-1C accommodates Class H(K) and Class R fuses in a 0.813" diameter by 3" length cartridge format with box lug termination.

Substiute Parts

H25060-1C

Eaton - Bussmann Electrical DivisionIn Stock: 729H25060-1C Datasheet

Current PartRFQ

HM25060-1CR

Eaton - Bussmann Electrical DivisionIn Stock: 1024HM25060-1CR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The HM25060-1CR qualifies as a direct substitute based on the following critical parameters that determine functional compatibility:

• Current Rating: 60 A (identical)
• Voltage Rating: 250V (identical)
• Number of Circuits: 1 (identical)
• Fuse Type: Cartridge (identical)
• Fuseholder Type: Block (identical)
• Termination Style: Box Lug (identical)
• Fuse Compatibility: Class H(K) fuses (compatible subset of original Class H(K) and Class R)
• Manufacturer: Eaton - Bussmann Electrical Division (same manufacturer)

The primary difference is mounting configuration: HM25060-1CR supports DIN Rail and Panel Mount options versus the chassis mount of H25060-1C. This substitution is valid when the installation environment permits alternative mounting methods while maintaining electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

The HM25060-1CR is an active product with RoHS compliance certification, whereas the H25060-1C is obsolete. Selection of HM25060-1CR is appropriate when:

• The installation permits DIN Rail or Panel Mount configuration in place of chassis mount
• Electrical specifications (60A, 250V, single circuit, cartridge fuse block) match system requirements
• Class H(K) fuse compatibility is acceptable for the application
• RoHS compliance is required or preferred for new installations

The HM25060-1CR maintains identical electrical ratings and mechanical interface (box lug termination) while offering modern manufacturing standards and active product support from the manufacturer.

Frequently Asked Questions (FAQ)

Q: Can HM25060-1CR directly replace H25060-1C in an existing chassis-mounted installation?

A: Electrical compatibility is confirmed. Physical installation requires evaluation of the mounting surface and available space. HM25060-1CR supports DIN Rail and Panel Mount configurations; chassis mount applications may require mechanical adaptation or enclosure redesign.

Q: Are the fuse cartridges interchangeable between H25060-1C and HM25060-1CR?

A: Both blocks accept identical 0.813" diameter by 3" length cartridge fuses. HM25060-1CR is specified for Class H(K) fuses. The original H25060-1C supports both Class H(K) and Class R fuses; verify that Class H(K) fuses meet application requirements.

Q: What is the significance of the product status difference?

A: H25060-1C is obsolete and no longer manufactured. HM25060-1CR is an active product with ongoing manufacturer support, technical documentation, and supply availability. For new designs or long-term maintenance planning, HM25060-1CR is the recommended selection.

Q: Does RoHS compliance affect electrical performance?

A: RoHS compliance in HM25060-1CR indicates conformance to material restrictions on hazardous substances. Electrical performance and current-carrying capacity remain equivalent to the original H25060-1C specification.

Q: What packaging options are available?

A: H25060-1C is available in standard packaging. HM25060-1CR is supplied in bulk packaging, suitable for production environments and system integrators.