H2415S-2WR2 Equivalent & Substitute Parts Reference

Part Overview

The H2415S-2WR2 is an isolated DC DC converter module from Mornsun America, LLC, providing a single 15V output at up to 133mA from an input voltage range of 21.6V to 26.4V. It is designed for medical applications and features 6 kV isolation, through hole mounting in a 7-SIP module, and an operating temperature range of -40°C to 85°C. The part is RoHS3 compliant with certifications from CE and cURus. This part is now obsolete, making the identification of equivalent and substitute models necessary for ongoing designs or maintenance using the same electrical and mechanical parameters.

Substiute Parts

H2415S-2WR2

Mornsun America, LLCIn Stock: 1122H2415S-2WR2 Datasheet

Current PartRFQ

AM2DM-2415SH60-NZ

aimtecIn Stock: 966AM2DM-2415SH60-NZ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the H2415S-2WR2 isolated DC DC converter has been conducted strictly using the following electrical, mechanical, and compliance parameters: input voltage range, output voltage, maximum output current, isolation voltage, output power rating, medical application suitability, operating temperature range, mounting type, package/case dimensions, approval agency certifications (CE, cURus), and RoHS status. Only parts matching these parameters have been considered as substitutes.

Parameter Comparison

Engineering Selection Recommendations

The H2415S-2WR2 is obsolete and unavailable for new designs. The AM2DM-2415SH60-NZ from aimtec is parametric equivalent, matching all specified electrical, mechanical, and compliance parameters including RoHS3 status and approvals from CE and cURus. When selecting a substitute, ensure ongoing requirements for product status (active versus obsolete), regulatory compliance, and application-specific certification are maintained as provided.

Frequently Asked Questions (FAQ)

Q1: What makes the AM2DM-2415SH60-NZ a valid substitute for the H2415S-2WR2?
A1: The AM2DM-2415SH60-NZ matches all key electrical parameters—input voltage range, output voltage, current, power, and isolation—and shares identical form factor, mounting type, and necessary certifications.

Q2: Are there any mechanical differences between these DC DC converters?
A2: The two parts share identical package dimensions and 7-SIP module case configuration.

Q3: Is there any difference in agency approvals or RoHS compliance?
A3: Both the H2415S-2WR2 and AM2DM-2415SH60-NZ are CE and cURus approved and are RoHS3 compliant.

Q4: Can these parts be directly interchanged in an existing PCB footprint?
A4: Both use the 7-SIP module, 4 leads configuration, ensuring direct pin and footprint compatibility as specified.

Q5: What should be checked when substituting DC DC converters in medical equipment?
A5: Confirm equivalence in certifications (CE, cURus), medical suitability, electrical ratings, and mechanical fit based solely on provided and matched parameters.