H-220C-LP LED Holder Equivalent & Substitute Parts

Part Overview

The H-220C-LP is an active T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This component is constructed from black nylon material with a standoff length of 0.378" (9.60mm) and accommodates two-lead LED configurations. The part is ROHS3 compliant and carries unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are identified to address inventory availability, material preference variations, or dimensional tolerance requirements within acceptable engineering parameters for T1 LED standoff applications.

Substiute Parts

H-220C-LP

Bivar Inc.In Stock: 1096H-220C-LP Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the H-220C-LP is determined by the following critical parameters: LED type (T1), color (black), lead configuration (2-lead), mounting style (right-angle), and compliance certifications (ROHS3). Standoff length variations within 0.365" to 0.390" (9.27mm to 9.91mm) are acceptable substitutes provided all other parameters remain constant.

Material composition (nylon versus PVC) represents a secondary variation parameter. Both nylon and PVC materials satisfy the functional requirements for T1 LED standoff applications while maintaining equivalent electrical and mechanical performance characteristics.

The following parts meet substitution criteria:

• H-201C: Nylon material, 0.380" length, identical functional classification
• ELM 5-390: PVC material, 0.390" length, within acceptable dimensional tolerance
• ELM 2-365: PVC material, 0.365" length, within acceptable dimensional tolerance

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status with ROHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory and environmental compliance equivalence to the H-220C-LP.

H-201C represents the closest functional equivalent, utilizing identical nylon material composition with a standoff length of 0.380" (9.65mm), a variance of 0.002" (0.05mm) from the primary part. This substitute is suitable for applications where material consistency with the original specification is required.

ELM 5-390 and ELM 2-365 employ PVC material construction instead of nylon. ELM 5-390 provides a standoff length of 0.390" (9.91mm), while ELM 2-365 provides 0.365" (9.27mm). These substitutes are appropriate for applications where material flexibility is acceptable and dimensional tolerance permits the specified length variations.

Selection between nylon-based (H-201C) and PVC-based (ELM 5-390, ELM 2-365) alternatives depends on application-specific material requirements and mechanical tolerance specifications.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the H-220C-LP?

A: Substitution eligibility requires matching LED type (T1), color (black), lead configuration (2-lead), mounting style (right-angle), and compliance certifications (ROHS3). Standoff length must fall within the 0.365" to 0.390" range. Material composition (nylon or PVC) may vary between equivalent parts.

Q: Are nylon and PVC materials interchangeable in these LED standoff applications?

A: Both nylon and PVC materials satisfy the functional requirements for T1 LED standoff holders. Material selection depends on application-specific environmental conditions, mechanical stress requirements, and design specifications. Both materials maintain equivalent electrical performance and compliance certifications.

Q: What is the maximum acceptable standoff length variation?

A: Acceptable standoff length ranges from 0.365" (9.27mm) to 0.390" (9.91mm), representing a total tolerance band of 0.025" (0.64mm). The primary part H-220C-LP measures 0.378" (9.60mm), positioning it centrally within this acceptable range.

Q: Do all substitute parts carry the same compliance certifications?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating, matching the primary part H-220C-LP. All parts maintain active product status.

Q: What packaging formats are available for these substitute parts?

A: H-220C-LP is supplied in standard packaging. H-201C, ELM 5-390, and ELM 2-365 are supplied in bag packaging. Packaging format does not affect functional equivalence or substitution eligibility.