H2032-01 Equivalent & Substitute Parts

Part Overview

The H2032-01 is a Terminal Turret Connector manufactured by Harwin Inc., classified as a single-end, fork, hollow turret terminal with tin contact finish. This component is designed for through-hole mounting applications with swage termination. The part is currently listed as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design and procurement requirements. The H2032-01 remains available in inventory (861 pcs) and maintains full ROHS3 compliance and REACH unaffected status.

Substiute Parts

H2032-01

Harwin Inc.In Stock: 960H2032-01 Datasheet

Current PartRFQ

H2039-01

Harwin Inc.In Stock: 1355H2039-01 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The H2032-01 has one identified substitute: H2039-01. This substitution is based on matching the following critical parameters:

• Terminal Type: Single End, Fork, Hollow (identical)
• Mounting Type: Through Hole (identical)
• Termination Method: Swage (identical)
• Contact Material: Brass Alloy (identical)
• Contact Finish: Tin (identical)
• Insulation: Non-Insulated (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)

The primary difference between these parts is the length above board: H2032-01 measures 0.375" (9.53mm) while H2039-01 measures 0.500" (12.70mm). This dimensional variation also affects related measurements including flange diameter, turret head diameter, and mounting hole diameter. The H2039-01 is designed for applications requiring greater standoff height and accommodates thicker board assemblies (0.126" vs. 0.063").

Parameter Comparison

Engineering Selection Recommendations

The H2039-01 is the manufacturer-recommended substitute for the obsolete H2032-01. Both parts maintain identical compliance certifications (ROHS3 Compliant, REACH Unaffected, EAR99 ECCN classification). The H2039-01 is currently in active production status with higher inventory availability (1314 pcs), ensuring supply chain continuity.

Selection of H2039-01 requires design accommodation for increased dimensional specifications. The substitute part is suitable for applications where the increased length above board (0.500" vs. 0.375"), larger flange diameter (0.219" vs. 0.187"), and thicker board compatibility (0.126" vs. 0.063") are compatible with the mechanical and electrical requirements of the assembly.

Frequently Asked Questions (FAQ)

Q: Can H2039-01 directly replace H2032-01 in existing designs?

A: Direct replacement requires design review. While both parts share identical terminal type, mounting method, termination technique, and contact properties, the H2039-01 has larger overall dimensions and is designed for thicker printed circuit boards. PCB layout, component spacing, and mechanical clearances must be evaluated.

Q: What are the key dimensional differences between these parts?

A: The H2039-01 exceeds the H2032-01 in length above board by 0.125" (3.17mm), flange diameter by 0.032" (0.81mm), turret head diameter by approximately 0.031" (0.78mm), and mounting hole diameter by 0.032" (0.81mm). The H2039-01 accommodates board thickness of 0.126" compared to 0.063" for the H2032-01.

Q: Are there compliance or certification differences?

A: No. Both H2032-01 and H2039-01 maintain identical RoHS3 compliance, REACH unaffected status, and EAR99 ECCN classification. Moisture sensitivity level is identical at MSL 1 (Unlimited).

Q: What is the availability status of each part?

A: H2032-01 is obsolete but currently in stock (861 pcs). H2039-01 is in active production with higher inventory (1314 pcs), providing better long-term supply assurance.

Q: Are the contact materials and finishes identical?

A: Yes. Both parts use brass alloy contact material with tin finish, ensuring equivalent electrical and corrosion resistance properties.