H-201C-1 LED Holder Equivalent & Substitute Parts

Part Overview

The H-201C-1 is a T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This component features a black nylon construction with a 0.380" (9.65mm) standoff length and is classified as an active product with ROHS3 compliance. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design specifications permit material or dimensional variations within acceptable tolerances.

Substiute Parts

H-201C-1

Bivar Inc.In Stock: 869H-201C-1 Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the H-201C-1 is determined by the following critical parameters: LED type (T1), color (black), standoff length tolerance, material composition, and regulatory compliance (ROHS3). The substitute parts identified maintain compatibility with T1 LED applications and black color specification. However, material variations exist between nylon and PVC formulations, and standoff length tolerances range from 0.365" to 0.390". These dimensional and material differences must be evaluated against specific application requirements before substitution.

The three parts identified as equivalents or substitutes are:

• H-201C: Identical specification to H-201C-1 (same series, material, and dimensions)
• ELM 5-390: T1 LED standoff with 0.390" length (PVC material, +0.010" length variation)
• ELM 2-365: T1 LED standoff with 0.365" length (PVC material, −0.015" length variation)

Parameter Comparison

Engineering Selection Recommendations

H-201C is the direct equivalent to H-201C-1, offering identical specifications including nylon material, 0.380" standoff length, and T1 LED compatibility. Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating. Selection of H-201C is appropriate when direct replacement is required without design modification.

ELM 5-390 provides a substitute option with a 0.390" standoff length, representing a +0.010" dimensional increase from the main part. The material composition differs (PVC instead of nylon), which may affect mechanical properties and thermal characteristics. This part maintains ROHS3 compliance and is suitable for applications where the increased standoff length is acceptable and PVC material properties are compatible with the design environment.

ELM 2-365 provides a substitute option with a 0.365" standoff length, representing a −0.015" dimensional decrease from the main part. Like ELM 5-390, this part uses PVC material instead of nylon. This part maintains ROHS3 compliance and is suitable for applications where the reduced standoff length is acceptable and PVC material properties are compatible with the design environment.

All three parts are active products with full regulatory compliance. Selection between nylon (H-201C-1, H-201C) and PVC (ELM 5-390, ELM 2-365) materials must be based on application-specific requirements including thermal exposure, chemical resistance, and mechanical stress conditions.

Frequently Asked Questions (FAQ)

Q: Can H-201C be used as a direct replacement for H-201C-1?

A: Yes. H-201C is identical to H-201C-1 in all specified parameters: T1 LED type, 0.380" standoff length, black nylon material, right-angle mounting, and ROHS3 compliance. Both parts are manufactured by Bivar Inc. and are active products.

Q: What is the primary difference between H-201C and the ELM series substitutes?

A: The primary differences are material composition and standoff length. H-201C uses nylon material with a 0.380" standoff length. ELM 5-390 uses PVC material with a 0.390" standoff length. ELM 2-365 uses PVC material with a 0.365" standoff length. All maintain T1 LED compatibility and black color specification.

Q: Are the dimensional variations between 0.365", 0.380", and 0.390" significant for substitution?

A: Dimensional variations of ±0.015" may be significant depending on application requirements. The standoff length directly affects LED positioning relative to the mounting surface and adjacent components. Applications with tight spatial constraints or specific optical alignment requirements must evaluate whether these variations are acceptable.

Q: Do material differences between nylon and PVC affect part performance?

A: Nylon and PVC have different mechanical, thermal, and chemical properties. Nylon generally offers higher temperature resistance and superior mechanical strength, while PVC may provide different chemical resistance characteristics. Material selection must align with the specific operating environment, temperature range, and exposure conditions of the application.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. H-201C-1, H-201C, ELM 5-390, and ELM 2-365 are all ROHS3 compliant. All parts also maintain a Moisture Sensitivity Level of 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: What is the inventory status of these parts?

A: H-201C-1 has 843 pieces in stock. H-201C has 63,104 pieces in stock. ELM 5-390 has 2,242 pieces in stock. ELM 2-365 has 16,125 pieces in stock. Inventory levels are subject to change and should be verified at the time of procurement.

Q: Can these parts be used interchangeably in all applications?

A: Interchangeability depends on specific application requirements. While all parts support T1 LED mounting and maintain regulatory compliance, differences in standoff length and material composition may affect suitability for particular designs. Applications must verify that dimensional tolerances and material properties are compatible with their specific requirements before substitution.