H-200C-1

Part Overview

The H-200C-1 is a T1 LED standoff holder manufactured by Bivar Inc., featuring a right-angle configuration with black nylon construction. This component is designed to mount 3mm LEDs in vertical applications with a 0.380" (9.65mm) standoff height. The part is currently Active in product status and ROHS3 compliant. Equivalent and substitute parts are necessary to address inventory availability, material preferences (nylon vs. PVC), and dimensional tolerance variations across production batches and alternative part series.

Substiute Parts

H-200C-1

Bivar Inc.In Stock: 944H-200C-1 Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the H-200C-1 is determined by the following parameters: LED type (T1), color (Black), and standoff height tolerance. The substitute parts listed maintain identical LED type compatibility and color specification. Length variations occur within the 0.365" to 0.390" range, representing acceptable dimensional tolerance for this product category. Material substitution from nylon to PVC is permissible within this component family, as both materials provide equivalent electrical insulation and mechanical support characteristics required for T1 LED mounting applications.

The substitutes H-201C, ELM 5-390, and ELM 2-365 are all ROHS3 compliant with MSL rating of 1. H-201C is a nylon-based alternative in the H-200 series with identical dimensions. ELM 5-390 and ELM 2-365 are PVC-based alternatives from different series with length variations of ±0.010" from the nominal 0.380" specification.

Parameter Comparison

Engineering Selection Recommendations

All four parts maintain Active product status, ensuring continued manufacturer support and availability. Complete ROHS3 compliance and MSL rating of 1 across all variants confirm regulatory conformance and unlimited moisture sensitivity tolerance. Selection between nylon and PVC material variants should be based on circuit board assembly process requirements and mechanical performance specifications for the target application.

H-201C provides exact dimensional and material equivalence to H-200C-1 within the H-200 series. ELM 5-390 offers dimensional compatibility with a +0.010" length variance, while ELM 2-365 introduces a −0.015" length variance. Material selection between nylon and PVC does not affect regulatory compliance or moisture sensitivity ratings.

Frequently Asked Questions (FAQ)

Q: Can ELM 5-390 replace H-200C-1 directly in high-tolerance assemblies? A: ELM 5-390 has a length of 0.390" compared to H-200C-1's 0.380", representing a +0.010" dimensional variance. Direct substitution is acceptable only if application tolerances permit this length increase.

Q: What is the difference between nylon (H-200C-1, H-201C) and PVC (ELM 5-390, ELM 2-365) variants? A: Both materials are ROHS3 compliant with identical MSL ratings. Material selection depends on circuit board assembly process compatibility and mechanical property requirements specific to the end application.

Q: Is ELM 2-365 compatible with standard T1 LED mounting requirements? A: Yes. ELM 2-365 maintains T1 LED type compatibility with a length of 0.365", representing a −0.015" variance from the nominal 0.380" specification. Substitution is valid when application tolerances accommodate this dimensional reduction.

Q: Do all substitute parts use the same packaging format? A: Yes. All parts (H-200C-1, H-201C, ELM 5-390, and ELM 2-365) are supplied in bag packaging.

Q: Are there any REACH or compliance differences between the main part and substitutes? A: H-200C-1, H-201C, ELM 5-390, and ELM 2-365 all maintain ROHS3 compliance. Additional REACH Unaffected status is documented for H-201C, ELM 5-390, and ELM 2-365.