H-200C LED Holder Equivalent & Substitute Parts

Part Overview

The H-200C is a T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This component is constructed from black nylon and measures 0.380" (9.65mm) in length. The part maintains Active product status and is RoHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity protection.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the H-200C specifications, enabling direct functional replacement in applications requiring T1 LED standoff holders with matching dimensional and material characteristics.

Substiute Parts

H-200C

Bivar Inc.In Stock: 959H-200C Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the H-200C are classified based on the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 (all substitutes match)
• Color: Black (all substitutes match)
• RoHS Compliance: ROHS3 (all substitutes match)
• MSL Rating: 1 (all substitutes match)
• Manufacturer: Bivar Inc. (all substitutes match)

Material and Dimensional Variations:

The H-201C represents a direct equivalent with identical nylon construction and 0.380" length, differing only in series designation.

The ELM 5-390 and ELM 2-365 are parametric equivalents utilizing PVC material instead of nylon, with dimensional variations in length (0.390" and 0.365" respectively). These parts maintain T1 LED compatibility and equivalent compliance ratings, enabling substitution where material composition and precise length tolerances permit functional interchange.

Parameter Comparison

Engineering Selection Recommendations

H-201C Selection: The H-201C is the primary equivalent for H-200C applications. Both parts share identical nylon construction, 0.380" length specification, and T1 LED compatibility. Both maintain Active product status with ROHS3 compliance and MSL 1 rating. Selection between H-200C and H-201C is determined by inventory availability and series-specific design requirements.

ELM 5-390 Selection: The ELM 5-390 functions as a parametric equivalent where PVC material substitution is acceptable. The 0.390" length represents a 0.010" (0.25mm) increase from the H-200C specification. This part maintains full ROHS3 compliance and MSL 1 rating. Selection requires confirmation that PVC material properties and increased length do not conflict with mechanical assembly constraints.

ELM 2-365 Selection: The ELM 2-365 functions as a parametric equivalent where PVC material substitution is acceptable. The 0.365" length represents a 0.015" (0.38mm) decrease from the H-200C specification. This part maintains full ROHS3 compliance and MSL 1 rating. Selection requires confirmation that PVC material properties and reduced length do not conflict with mechanical assembly constraints or clearance requirements.

Frequently Asked Questions (FAQ)

Q: Can H-201C directly replace H-200C in all applications?

A: Yes. The H-201C shares identical specifications with the H-200C: T1 LED type, 0.380" length, black nylon construction, and equivalent compliance ratings. Direct substitution is supported without design modification.

Q: What is the primary difference between H-200C and the ELM series substitutes?

A: The ELM 5-390 and ELM 2-365 utilize PVC material instead of nylon. Additionally, ELM 5-390 measures 0.390" in length (0.010" longer), while ELM 2-365 measures 0.365" in length (0.015" shorter) compared to the H-200C specification of 0.380".

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitutes—H-201C, ELM 5-390, and ELM 2-365—maintain ROHS3 compliance identical to the H-200C.

Q: Do material differences between nylon and PVC affect LED holder performance?

A: Material selection depends on application-specific requirements including thermal tolerance, chemical resistance, and mechanical stress. Both nylon and PVC are suitable for T1 LED standoff applications. Confirmation of material compatibility with the specific application environment is required before substitution.

Q: What inventory levels are available for each part?

A: H-200C: 849 Pcs; H-201C: 63,104 Pcs; ELM 5-390: 2,242 Pcs; ELM 2-365: 16,125 Pcs. All parts are listed as New Original In Stock.

Q: Can ELM 5-390 and ELM 2-365 be used interchangeably?

A: No. The dimensional difference of 0.025" (0.64mm) between these parts may create incompatibility in space-constrained assemblies. Selection between these parts requires verification that the specific length requirement aligns with mechanical design constraints.

Q: Are all substitute parts packaged identically?

A: Yes. All parts—H-200C, H-201C, ELM 5-390, and ELM 2-365—are supplied in Bag packaging.