H16WD6090GH Solid State Relay - Equivalent & Substitute Parts

Part Overview

The H16WD6090GH is an active Sensata-Crydom solid state relay (SSR) with SPST-NO (1 Form A) configuration, rated for 90A load current and 48-690V AC output voltage. This hockey puck-style chassis mount relay is designed for industrial switching applications requiring zero-cross AC control with 4-32VDC input signal. The part is RoHS compliant and carries unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or application-specific requirements.

Substiute Parts

H16WD6090GH

Sensata-CrydomIn Stock: 1113H16WD6090GH Datasheet

Current PartRFQ

84138150N

CrouzetIn Stock: 93184138150N Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the H16WD6090GH is determined by the following critical parameters:

• Circuit Configuration: Must be SPST-NO (1 Form A) to maintain identical switching topology
• Output Type: Must be AC with zero-cross capability for synchronized switching control
• Load Current Rating: Must be rated for 90A minimum to handle specified load
• Input Voltage Range: Must accept 4-32VDC control signal
• Package / Case: Must be hockey puck form factor for mechanical compatibility
• Mounting Type: Must support chassis mount installation
• Termination Style: Must use screw terminal connections
• Compliance: Must maintain RoHS compliance status

The identified substitute part meets all critical electrical and mechanical parameters while maintaining functional equivalence for industrial AC switching applications.

Parameter Comparison

Engineering Selection Recommendations

Both the H16WD6090GH and 84138150N are active products with RoHS compliance and identical MSL ratings. Selection between these parts is determined by load voltage requirements:

• H16WD6090GH: Select when load voltage range of 48-690V is required
• 84138150N: Select when load voltage range of 24-500V is sufficient

Both parts share identical input voltage control range (4-32VDC), load current capacity (90A), circuit topology (SPST-NO), output switching type (AC zero-cross), mechanical form factor (hockey puck), and termination method (screw terminal). The primary electrical difference is the maximum load voltage rating, which must be verified against application requirements before substitution.

Frequently Asked Questions (FAQ)

Q: Can 84138150N replace H16WD6090GH in all applications?

A: Substitution is valid only when the application load voltage does not exceed 500V. The H16WD6090GH supports up to 690V, while 84138150N is rated to 500V maximum. Verify your load voltage specification before substitution.

Q: Are the input control voltage ranges identical?

A: Yes. Both parts accept 4-32VDC input control signal, ensuring compatible control circuit integration.

Q: Do both parts use the same mechanical mounting and termination?

A: Yes. Both are hockey puck chassis mount relays with screw terminal connections, providing identical mechanical compatibility and installation procedures.

Q: Are there compliance differences between these parts?

A: No. Both parts are RoHS compliant with MSL 1 (unlimited moisture sensitivity rating) and carry EAR99 ECCN classification.

Q: What is the load current capacity for both parts?

A: Both parts are rated for 90A load current, providing identical current-switching capability.

Q: How do I determine which part to use?

A: Identify your application's maximum load voltage requirement. If it does not exceed 500V, either part is suitable. If your application requires voltage support above 500V up to 690V, the H16WD6090GH is required.