H-133C-2-160 LED Holder Equivalent & Substitute Parts

Part Overview

The H-133C-2-160 is a T1 LED standoff holder manufactured by Bivar Inc., designed for 3mm LED applications with right-angle mounting configuration. This part features black nylon construction with a 0.290" (7.37mm) standoff length and accommodates 2-lead LED configurations.

The H-133C-2-160 carries an Obsolete product status. Locating equivalent and substitute parts is necessary to maintain design continuity, ensure component availability, and support ongoing production or repair requirements. Active alternative parts with identical or compatible electrical and mechanical parameters are available from the same manufacturer.

Key Parameters

Parameter	Value
LED Type	T1
Standoff Length	0.290" (7.37mm)
Color	Black
Material	Nylon
Lead Configuration	2-Lead
Mounting Style	Right-Angle
Moisture Sensitivity Level	1 (Unlimited)
ECCN Classification	EAR99

Substitute Part Grouping Explanation

Substitution eligibility for the H-133C-2-160 is determined by the following critical parameters:

Primary Compatibility Criteria:

LED Type: T1 (fixed requirement)
Standoff Length: 0.290" (7.37mm) (exact match required for mechanical fit)
Lead Configuration: 2-Lead (fixed requirement)
Color: Black (fixed requirement)
Moisture Sensitivity Level: 1 (Unlimited) (fixed requirement)

Secondary Compatibility Criteria:

Material: Nylon or PVC (both acceptable for mechanical and electrical performance)
Mounting Style: Right-Angle (fixed requirement)
ECCN Classification: EAR99 (regulatory compliance maintained)

Substitute parts are grouped into two categories:

Category 1 - Direct Nylon Equivalent: H-130C-1-160 matches all parameters including material composition and carries Active product status with RoHS3 compliance.

Category 2 - Parametric Equivalents (PVC Material): ELM 2-290 and ELM 4-290 provide identical standoff length (0.290" / 7.37mm) with PVC material substitution. These parts maintain all electrical and mechanical compatibility while offering Active product status and RoHS3 compliance.

Category 3 - Length Variants (PVC Material): ELM 2-280, ELM 2-285, ELM 2-295, ELM 2-7MM, ELM 4-280, ELM 4-285, and ELM 4-295 provide alternative standoff lengths within the T1 LED holder family. These parts are suitable only when mechanical clearance permits length variation.

Parameter Comparison

Part Number	Manufacturer	LED Type	Standoff Length	Material	Color	Product Status	RoHS Status	Inventory (Pcs)
H-133C-2-160	Bivar Inc.	T1	0.290" (7.37mm)	Nylon	Black	Obsolete	Vendor Undefined	1108
H-130C-1-160	Bivar Inc.	T1	0.290" (7.37mm)	Nylon	Black	Active	RoHS3 Compliant	1012
ELM 2-290	Bivar Inc.	T1	0.290" (7.37mm)	PVC	Black	Active	RoHS3 Compliant	783
ELM 4-290	Bivar Inc.	T1	0.290" (7.37mm)	PVC	Black	Active	RoHS3 Compliant	959
ELM 2-280	Bivar Inc.	T1	0.280" (7.11mm)	PVC	Black	Active	RoHS3 Compliant	882
ELM 2-285	Bivar Inc.	T1	0.285" (7.24mm)	PVC	Black	Active	RoHS3 Compliant	1874
ELM 2-295	Bivar Inc.	T1	0.295" (7.49mm)	PVC	Black	Active	RoHS3 Compliant	1050
ELM 2-7MM	Bivar Inc.	T1	0.280" (7.11mm)	PVC	Black	Active	RoHS3 Compliant	1005
ELM 4-280	Bivar Inc.	T1	0.280" (7.11mm)	PVC	Black	Active	RoHS3 Compliant	980
ELM 4-285	Bivar Inc.	T1	0.285" (7.24mm)	PVC	Black	Active	RoHS3 Compliant	942
ELM 4-295	Bivar Inc.	T1	0.295" (7.49mm)	PVC	Black	Active	RoHS3 Compliant	1085

Engineering Selection Recommendations

Primary Recommendation - Direct Replacement:

H-130C-1-160 is the preferred substitute for H-133C-2-160. This part maintains identical standoff length (0.290" / 7.37mm), material composition (Nylon), and all mechanical parameters. H-130C-1-160 carries Active product status and RoHS3 Compliant certification, ensuring long-term availability and regulatory compliance. Inventory availability is confirmed at 1012 pieces.

Secondary Recommendations - Material Variant Substitutes:

ELM 2-290 and ELM 4-290 provide equivalent mechanical performance with PVC material substitution in place of Nylon. Both parts maintain the critical 0.290" (7.37mm) standoff length and T1 LED compatibility. Both carry Active product status and RoHS3 Compliant certification. Material substitution from Nylon to PVC does not affect electrical performance or mechanical fit for standard PCB mounting applications. ELM 2-290 inventory: 783 pieces; ELM 4-290 inventory: 959 pieces.

Alternative Recommendations - Length Variant Substitutes:

ELM 2-280, ELM 2-285, ELM 2-295, ELM 2-7MM, ELM 4-280, ELM 4-285, and ELM 4-295 are suitable substitutes only when design specifications permit standoff length variation. These parts maintain T1 LED compatibility and PVC material construction with Active product status and RoHS3 compliance. Selection among these variants depends on specific mechanical clearance requirements in the target application.

All recommended substitutes maintain EAR99 ECCN classification and Moisture Sensitivity Level 1 (Unlimited) consistent with the original part.

Frequently Asked Questions (FAQ)

Q: Can H-130C-1-160 be used as a direct replacement for H-133C-2-160?

A: Yes. H-130C-1-160 is a direct replacement. Both parts share identical standoff length (0.290" / 7.37mm), Nylon material, Black color, T1 LED type, and 2-lead configuration. H-130C-1-160 carries Active product status and RoHS3 compliance, providing superior long-term availability compared to the Obsolete H-133C-2-160.

Q: What is the difference between Nylon and PVC material options?

A: Both Nylon (H-130C-1-160) and PVC (ELM 2-290, ELM 4-290) materials are acceptable for T1 LED standoff applications. Material selection does not affect electrical performance or standard PCB mounting compatibility. Nylon offers slightly higher rigidity; PVC offers equivalent mechanical performance with broader availability in the active product line. Selection depends on specific application requirements and material preference.

Q: Can I use ELM 2-285 or ELM 2-295 if the standoff length differs from 0.290"?

A: ELM 2-285 (0.285" / 7.24mm) and ELM 2-295 (0.295" / 7.49mm) are suitable only when mechanical clearance in the target application permits the length variation. Standoff length directly affects LED positioning relative to the PCB surface. Verify that the alternative length does not interfere with component placement, solder joint clearance, or optical alignment requirements before substitution.

Q: What does RoHS3 Compliant certification mean for substitution?

A: RoHS3 Compliant certification indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All active substitute parts (H-130C-1-160, ELM 2 series, ELM 4 series) carry RoHS3 compliance. The original H-133C-2-160 shows Vendor Undefined RoHS status. Substitution with RoHS3 compliant parts ensures regulatory compliance for new designs and manufacturing processes.

Q: Are ELM 2 and ELM 4 series parts interchangeable?

A: ELM 2 and ELM 4 series parts with identical standoff lengths (ELM 2-280 / ELM 4-280, ELM 2-285 / ELM 4-285, ELM 2-290 / ELM 4-290, ELM 2-295 / ELM 4-295) are mechanically and electrically equivalent. Series designation reflects internal design variations that do not affect T1 LED holder performance. Selection between series depends on inventory availability and supplier preference.

Q: What inventory levels should I consider for long-term supply planning?

A: Current inventory levels are: H-130C-1-160 (1012 pcs), ELM 2-290 (783 pcs), ELM 4-290 (959 pcs), ELM 2-285 (1874 pcs), ELM 4-295 (1085 pcs). For applications requiring high-volume or long-term supply, ELM 2-285 offers the highest current inventory. Confirm availability with supplier for production quantities exceeding current stock levels.

Q: Does the packaging format affect substitution compatibility?

A: Packaging format (Bag for substitute parts versus unspecified for H-133C-2-160) does not affect electrical or mechanical compatibility. Packaging affects handling, storage, and logistics only. All parts are functionally equivalent regardless of packaging configuration.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message