Equivalent & Substitute Parts for H-130C-2-120

Part Overview

The H-130C-2-120 is a T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This black nylon component features a 0.250" (6.35mm) standoff height and accommodates two-lead configurations. The part is Active in product status and ROHS3 compliant, making it suitable for current production applications. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative component selection while maintaining functional compatibility within the specified parameter range.

Substiute Parts

H-130C-2-120

Bivar Inc.In Stock: 1008H-130C-2-120 Datasheet

Current PartRFQ

ELM 4-6MM

Bivar Inc.In Stock: 1817ELM 4-6MM Datasheet

Parametric EquivalentRFQ

H-131C-1-120

Bivar Inc.In Stock: 1967H-131C-1-120 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the H-130C-2-120 are qualified based on the following critical parameters:

Primary Compatibility Criteria:

• LED Type: T1 (all substitutes must support T1 LED mounting)
• Lead Configuration: 2LD (two-lead design)
• Color: Black
• Standoff Height: 0.250" (6.35mm) or within 0.010" tolerance (0.240" - 0.260")
• Product Status: Active
• RoHS Compliance: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

Material Consideration: Material variation (Nylon vs. PVC) is permitted when all other parameters align, as both materials satisfy the mechanical and environmental requirements for LED standoff applications in this category.

Two substitute parts meet these criteria: ELM 4-6MM and H-131C-1-120.

Parameter Comparison

Engineering Selection Recommendations

H-131C-1-120 Selection: This substitute provides exact parameter matching to the H-130C-2-120 across all critical dimensions and material composition. Both components are manufactured by Bivar Inc., share identical standoff height (0.250" / 6.35mm), material (Nylon), and all compliance certifications. This part is recommended when material consistency and dimensional precision are design requirements. Current inventory of 1950 pieces supports production continuity.

ELM 4-6MM Selection: This substitute qualifies through equivalent T1 LED support, 2LD configuration, and full RoHS3 compliance. The material differs (PVC vs. Nylon) and standoff height is 0.010" shorter (0.240" vs. 0.250"). Selection of this part is appropriate when design tolerance permits the reduced standoff height and material substitution is acceptable. Higher inventory availability (1737 pieces) may support extended lead time requirements.

Both substitutes maintain Active product status and unlimited moisture sensitivity rating, ensuring long-term availability and environmental stability equivalent to the main part.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-6MM be used as a direct replacement for H-130C-2-120?

A: ELM 4-6MM qualifies as a substitute based on T1 LED type, 2LD configuration, black color, and full RoHS3 compliance. However, the standoff height differs by 0.010" (0.240" vs. 0.250"). This substitution is valid only if your PCB layout and LED positioning tolerances accommodate the reduced height. Material composition also differs (PVC vs. Nylon).

Q: What is the primary difference between H-131C-1-120 and H-130C-2-120?

A: Both parts share identical specifications: T1 LED type, 2LD configuration, 0.250" standoff height, black nylon material, and full RoHS3 compliance. The difference lies in the series designation (H131C vs. H130C). Both are manufactured by Bivar Inc. and are fully interchangeable from an engineering standpoint.

Q: Does material substitution (Nylon to PVC) affect performance?

A: Both Nylon and PVC materials satisfy the mechanical and environmental requirements for T1 LED standoff applications in this category. Material selection between these options does not impact electrical performance or thermal characteristics. Selection depends on specific application requirements regarding chemical resistance or mechanical properties.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. Both ELM 4-6MM and H-131C-1-120 are ROHS3 compliant, matching the compliance status of the H-130C-2-120. All three parts are suitable for applications requiring RoHS certification.

Q: What packaging format is used for these parts?

A: All three parts (H-130C-2-120, ELM 4-6MM, and H-131C-1-120) are supplied in Bag packaging format.

Q: Which substitute has better inventory availability?

A: H-131C-1-120 has the highest current inventory at 1950 pieces, followed by ELM 4-6MM at 1737 pieces. The main part H-130C-2-120 has 964 pieces in stock.