LED Holder H-101C-EL Equivalent & Substitute Parts

Part Overview

The H-101C-EL is a T1 LED standoff holder manufactured by Bivar Inc., designed for right-angle mounting of 3mm LEDs. This black nylon component measures 0.285" (7.24mm) in length and accommodates two-lead LED configurations. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production applications. Equivalent and substitute parts are identified when they share identical electrical and mechanical parameters, including LED type, length, color, and compliance certifications.

Substiute Parts

H-101C-EL

Bivar Inc.In Stock: 1128H-101C-EL Datasheet

Current PartRFQ

ELM 2-285

Bivar Inc.In Stock: 1981ELM 2-285 Datasheet

Parametric EquivalentRFQ

H-101C

Bivar Inc.In Stock: 22198H-101C Datasheet

Parametric EquivalentRFQ

H-101C-1

Bivar Inc.In Stock: 12044H-101C-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the H-101C-EL are identified based on strict parametric equivalence. The primary substitution criteria are:

Critical Parameters for Substitution:

• LED Type: T1
• Physical Length: 0.285" (7.24mm)
• Color: Black
• Lead Configuration: 2LD
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Product Status: Active

Parts meeting all these parameters are classified as parametric equivalents. Material composition (Nylon vs. PVC) represents a secondary variation that does not prevent substitution when all primary parameters align. All substitute parts listed are manufactured by Bivar Inc. and maintain identical compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance, qualifying them for direct substitution in applications requiring T1 LED standoff holders with 0.285" (7.24mm) length and black color finish.

H-101C and H-101C-1: These nylon-based alternatives are identical to the H-101C-EL in all critical parameters. Both parts are manufactured by Bivar Inc. and carry REACH Unaffected status. H-101C offers the highest inventory availability at 22,132 pieces.

ELM 2-285: This part shares all critical electrical and mechanical parameters with H-101C-EL but uses PVC material instead of nylon. The material substitution does not affect compliance certifications or functional performance within the specified parameter set. Inventory availability is 1,874 pieces.

Selection between these alternatives should be based on material preference (nylon vs. PVC), inventory availability, and internal design specifications. All parts are suitable for production use without additional qualification.

Frequently Asked Questions (FAQ)

Q: Can H-101C be used as a direct replacement for H-101C-EL?

A: Yes. H-101C meets all critical substitution parameters: T1 LED type, 0.285" (7.24mm) length, black color, 2-lead configuration, ROHS3 compliance, and Active product status. Both are nylon-based components manufactured by Bivar Inc.

Q: What is the difference between H-101C-EL and ELM 2-285?

A: The primary difference is material composition. H-101C-EL uses nylon, while ELM 2-285 uses PVC. All other parameters—LED type, length, color, lead configuration, compliance certifications, and moisture sensitivity level—are identical. Both are suitable for T1 LED standoff applications.

Q: Are H-101C-1 and H-101C interchangeable?

A: Yes. H-101C-1 and H-101C are parametrically equivalent. Both are nylon-based T1 LED standoff holders with 0.285" (7.24mm) length, black color, and identical compliance certifications. The suffix "-1" indicates a variant designation but does not affect functional compatibility.

Q: Does material substitution (nylon to PVC) affect performance?

A: Within the provided parameter set, material composition does not prevent substitution. Both nylon and PVC variants maintain identical electrical properties, mechanical dimensions, compliance certifications, and moisture sensitivity levels. Material selection should be based on application-specific environmental or design requirements not specified in this parameter set.

Q: What packaging format is used for all substitute parts?

A: All parts listed—H-101C-EL, H-101C, H-101C-1, and ELM 2-285—are supplied in Bag packaging format.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 Compliant certification, meeting current regulatory requirements for electronic component manufacturing.