Equivalent & Substitute Parts for H-100C-1 LED Holder

Part Overview

The H-100C-1 is a T1 LED standoff holder manufactured by Bivar Inc., designed for 3mm LED applications. This black nylon component provides mechanical support and positioning for T1 LEDs in electronic assemblies. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, enabling component interchangeability in design and procurement workflows.

Substiute Parts

H-100C-1

Bivar Inc.In Stock: 801H-100C-1 Datasheet

Current PartRFQ

ELM 2-285

Bivar Inc.In Stock: 1981ELM 2-285 Datasheet

Parametric EquivalentRFQ

H-101C

Bivar Inc.In Stock: 22198H-101C Datasheet

Parametric EquivalentRFQ

H-101C-1

Bivar Inc.In Stock: 12044H-101C-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the H-100C-1 are identified based on the following critical parameters that determine functional equivalence:

Primary Equivalence Criteria:

• LED Type: T1
• Length: 0.285" (7.24mm)
• Color: Black
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Product Status: Active

Material Consideration: The H-100C-1 is manufactured from nylon. The substitute part ELM 2-285 is manufactured from PVC, which represents a material variation while maintaining all other critical parameters. Parts H-101C and H-101C-1 are nylon-based, matching the material specification of the main part.

All substitute parts are manufactured by Bivar Inc. and share identical electrical and mechanical specifications within the T1 LED holder category.

Parameter Comparison

Engineering Selection Recommendations

H-101C and H-101C-1: These parts are direct nylon-based equivalents to the H-100C-1, maintaining identical material composition and all critical parameters. Both are in active production status with ROHS3 compliance and unlimited MSL rating. H-101C offers the highest inventory availability at 22,132 pieces, while H-101C-1 provides 11,998 pieces in stock.

ELM 2-285: This part maintains all critical electrical and mechanical parameters with the exception of material composition, which is PVC rather than nylon. This part is suitable for applications where material substitution does not impact design requirements. ELM 2-285 has the highest inventory level at 1,874 pieces and carries identical compliance certifications.

All substitute parts carry ROHS3 compliance, EAR99 export classification, and matching HTSUS codes, confirming regulatory equivalence for procurement and supply chain purposes.

Frequently Asked Questions (FAQ)

Q: Can H-101C be used as a direct replacement for H-100C-1?

A: Yes. H-101C maintains identical specifications for LED type (T1), length (0.285"), color (black), material (nylon), RoHS compliance, and MSL rating. Both parts are in active production status.

Q: What is the difference between H-101C and H-101C-1?

A: Both parts share identical electrical and mechanical specifications. The difference is in part numbering convention within the H101C series. Both are nylon-based T1 LED holders with 0.285" length and full compliance certifications.

Q: Can ELM 2-285 replace H-100C-1 in all applications?

A: ELM 2-285 matches all critical parameters except material composition, which is PVC instead of nylon. Substitution is valid when material change does not affect design performance or environmental requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. H-101C, H-101C-1, and ELM 2-285 are all ROHS3 compliant, matching the compliance status of H-100C-1.

Q: What does MSL 1 (Unlimited) mean for these parts?

A: MSL 1 indicates the lowest moisture sensitivity level, meaning these components have unlimited shelf life and require no special moisture control during storage or handling.

Q: Are there packaging differences between these parts?

A: All parts are supplied in bag packaging format.