GV7600-IBE3 Equivalent & Substitute Parts

Part Overview

The GV7600-IBE3 is a video transmitter IC manufactured by Semtech, designed for professional video applications using SMPTE standards. This device operates as a parallel and serial transmitter in a 100-LBGA (11x11) surface mount package. The product is currently obsolete, making identification of suitable substitute components essential for system redesign, legacy support, or component sourcing in applications where this IC was originally specified.

Substiute Parts

GV7600-IBE3

SemtechIn Stock: 6232GV7600-IBE3 Datasheet

Current PartRFQ

GS2972-IBE3

Semtech CorporationIn Stock: 29778GS2972-IBE3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The GS2972-IBE3 qualifies as a substitute for the GV7600-IBE3 based on the following critical parameters:

Matching Parameters:

• Identical package specification: 100-LBGA (11x11)
• Identical supply voltage range: 1.14V ~ 1.26V
• Identical mounting type: Surface Mount
• Identical standards compliance: SMPTE
• Identical application domain: Professional Video
• Identical moisture sensitivity level: MSL 3 (168 Hours)
• Same manufacturer: Semtech

Functional Differentiation: The GS2972-IBE3 operates as a video serializer with GSPI control interface, whereas the GV7600-IBE3 functions as a transmitter with parallel and serial control interfaces. Both devices are linear category ICs designed for professional video signal processing within the same electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

The GS2972-IBE3 is the designated substitute for the obsolete GV7600-IBE3 based on electrical and mechanical compatibility within the specified parameter set. The substitute part maintains identical supply voltage specifications, package geometry, mounting requirements, and moisture sensitivity classification.

The GS2972-IBE3 carries active product status with ROHS3 compliance and REACH unaffected designation, providing regulatory advantages over the obsolete original part. The ECCN classification difference (5A991B1 versus EAR99) reflects updated export control categorization and should be verified against applicable trade compliance requirements for your application region.

Functional differences in control interface architecture (GSPI versus parallel/serial) and device role (serializer versus transmitter) require circuit-level evaluation to confirm operational compatibility within the target system design.

Frequently Asked Questions (FAQ)

Q: Can the GS2972-IBE3 be used as a direct pin-for-pin replacement for the GV7600-IBE3?

A: Both devices share identical package specifications (100-LBGA 11x11), supply voltage range (1.14V ~ 1.26V), and mounting type (surface mount). However, functional differences in control interface and device operation require verification of circuit compatibility before implementation.

Q: What is the significance of the product status difference between these parts?

A: The GV7600-IBE3 is obsolete, indicating discontinued manufacturing and limited availability. The GS2972-IBE3 maintains active status with current production and full manufacturer support, making it suitable for new designs and ongoing component sourcing.

Q: Are there compliance differences between these parts?

A: The GS2972-IBE3 carries ROHS3 compliance and REACH unaffected designation. The GV7600-IBE3 compliance status is not specified in available documentation. The ECCN classification differs (5A991B1 versus EAR99), which may affect export and trade compliance considerations.

Q: Do both parts require identical handling and storage conditions?

A: Both parts share identical moisture sensitivity level classification (MSL 3, 168 hours), requiring equivalent handling, storage, and reflow processing protocols during assembly and manufacturing.

Q: What should be verified before implementing the GS2972-IBE3 as a substitute?

A: Verification should focus on control interface compatibility (GSPI versus parallel/serial), functional operation within the system architecture, and compliance with applicable export control regulations for your region.