GTL2005PW/G-T Equivalent & Substitute Parts

Part Overview

The GTL2005PW/G-T is a mixed signal translator IC manufactured by NXP USA Inc., designed to provide bidirectional translation between GTL input signals and LVTTL/TTL output signals. This component features 1 circuit with 4 channels per circuit in a 14-TSSOP surface mount package. The part is classified as obsolete, making identification of functionally equivalent substitutes necessary for ongoing system support and component procurement.

Substiute Parts

GTL2005PW/G-T

NXP USA Inc.In Stock: 924GTL2005PW/G-T Datasheet

Current PartRFQ

GTL2005PW,118

NXP USA Inc.In Stock: 7904GTL2005PW,118 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GTL2005PW/G-T is determined by the following critical parameters:

• Translator Type: Mixed Signal
• Channel Type: Bidirectional
• Number of Circuits: 1
• Channels per Circuit: 4
• Input Signal: GTL
• Output Signal: LVTTL, TTL
• Output Type: Non-Inverted
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Package / Case: 14-TSSOP (0.173", 4.40mm Width)
• Mounting Type: Surface Mount

The substitute part GTL2005PW,118 maintains identical electrical specifications and mechanical compatibility across all critical parameters. The primary distinction is packaging format: the main part is supplied in standard packaging, while the substitute is supplied in Tape & Reel (TR) format.

Parameter Comparison

Engineering Selection Recommendations

Both the GTL2005PW/G-T and GTL2005PW,118 are functionally equivalent components from NXP USA Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

• GTL2005PW/G-T: Standard packaging format, suitable for lower-volume applications or manual assembly processes.
• GTL2005PW,118: Tape & Reel format, optimized for high-volume automated assembly operations.

Both parts maintain ROHS3 compliance, REACH unaffected status, and MSL Level 1 rating. The obsolete product status applies to both variants, indicating that long-term availability may be limited and component sourcing should be planned accordingly.

Frequently Asked Questions (FAQ)

Q: Can GTL2005PW,118 be used as a direct replacement for GTL2005PW/G-T?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: GTL2005PW,118 is supplied in Tape & Reel format while GTL2005PW/G-T uses standard packaging. Pin configuration, signal levels, and thermal characteristics are identical.

Q: What does the 14-TSSOP package specification mean for PCB design?

A: The 14-TSSOP package is a surface mount package with 14 pins, 0.173 inches wide (4.40mm). This specification ensures compatibility with standard PCB assembly equipment and footprint designs. Both substitute parts use this identical package.

Q: Are there any compliance differences between the two parts?

A: No. Both GTL2005PW/G-T and GTL2005PW,118 maintain identical ROHS3 compliance, REACH unaffected status, and Moisture Sensitivity Level 1 rating.

Q: Why is the product status listed as obsolete?

A: Obsolete status indicates that NXP USA Inc. has discontinued active production and support for this component. Existing inventory may be available through authorized distributors, but long-term availability is not guaranteed.

Q: What is the significance of MSL Level 1?

A: Moisture Sensitivity Level 1 indicates unlimited shelf life without moisture control requirements. This component does not require special dry storage or baking procedures prior to assembly.