GT8E-6P-DSA(13) Equivalent & Substitute Parts

Part Overview

The GT8E-6P-DSA(13) is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole mounting in board-to-cable/wire applications. This connector features a vertical orientation with 6 positions at 2.00mm pitch and shrouded 4-wall construction with latch lock fastening. The part is currently classified as obsolete, making identification of active equivalent alternatives essential for ongoing design support and procurement.

Substiute Parts

GT8E-6P-DSA(13)

Hirose Electric Co LtdIn Stock: 885GT8E-6P-DSA(13) Datasheet

Current PartRFQ

GT8E-6P-DSA(58)

Hirose Electric Co LtdIn Stock: 1034GT8E-6P-DSA(58) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GT8E-6P-DSA(13) is determined by the following critical parameters:

• Connector type, contact type, and gender (Header, Male Pin)
• Number of positions and row configuration (6 positions, 1 row)
• Mating pitch (0.079" / 2.00mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Board-to-cable/wire application style
• Shrouding configuration (Shrouded - 4 Wall)

The GT8E-6P-DSA(58) qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. Both connectors share identical position count, pitch, mounting type, termination method, and shrouding design. Differences in fastening type (latch lock versus push-pull), insulation material composition, contact finish specifications, and product status do not preclude functional substitution within the GT8E series architecture.

Parameter Comparison

Engineering Selection Recommendations

The GT8E-6P-DSA(58) is the manufacturer-recommended substitute for the obsolete GT8E-6P-DSA(13). Both connectors maintain RoHS compliance and MSL 1 rating, ensuring compatibility with current manufacturing and environmental standards.

Selection between these parts should be based on product availability and lifecycle requirements. The GT8E-6P-DSA(13) remains available in inventory (857 units) for legacy system support or repair applications. The GT8E-6P-DSA(58) is the active production part with higher inventory availability (941 units) and is suitable for new designs and ongoing procurement.

Differences in fastening mechanism (latch lock versus push-pull) and insulation material (PBT versus PA/Nylon) represent design variations within the GT8E series and do not affect core electrical or mechanical compatibility for standard board-to-cable/wire interconnect applications.

Frequently Asked Questions (FAQ)

Q: Can GT8E-6P-DSA(58) directly replace GT8E-6P-DSA(13) in existing designs?

A: Yes. Both connectors share identical pitch (2.00mm), position count (6), mounting type (through hole), and shrouding configuration. The fastening mechanism difference (latch lock versus push-pull) represents a design variant within the GT8E series and does not prevent functional substitution.

Q: What is the significance of the different fastening types?

A: The GT8E-6P-DSA(13) uses latch lock fastening, while the GT8E-6P-DSA(58) uses push-pull fastening. These represent different mating/unmating mechanisms. Selection depends on application requirements for connector retention and user interface preferences.

Q: How do the insulation material differences affect compatibility?

A: The GT8E-6P-DSA(13) uses PBT insulation while the GT8E-6P-DSA(58) uses PA/Nylon. Both materials are suitable for standard through-hole connector applications. Material selection may influence thermal and chemical resistance characteristics in specific operating environments.

Q: Are there compliance or certification differences between these parts?

A: Both connectors are RoHS compliant with MSL 1 rating. No compliance or certification differences exist between the two parts.

Q: What packaging options are available?

A: The GT8E-6P-DSA(13) packaging is not specified in available documentation. The GT8E-6P-DSA(58) is supplied in bulk packaging.

Q: Why is GT8E-6P-DSA(13) classified as obsolete?

A: The GT8E-6P-DSA(13) has been superseded by the GT8E-6P-DSA(58) in Hirose Electric's active product line. The substitute part maintains full functional compatibility while representing the current production offering.