GT8E-2P-DS Equivalent & Substitute Parts

Part Overview

The GT8E-2P-DS is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole, right-angle board-to-cable/wire applications. This connector features a 2-position configuration with 0.079" (2.00mm) pitch mating and shrouded 4-wall design with solder termination and latch lock fastening. The GT8E-2P-DS is classified as obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity and maintain supply chain reliability for applications currently utilizing this connector.

Substiute Parts

GT8E-2P-DS

Hirose Electric Co LtdIn Stock: 1020GT8E-2P-DS Datasheet

Current PartRFQ

GT8E-2P-DS(55)

Hirose Electric Co LtdIn Stock: 4142GT8E-2P-DS(55) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GT8E-2P-DS is determined by strict alignment of the following critical parameters:

• Connector Type: Header
• Number of Positions: 2
• Pitch - Mating: 0.079" (2.00mm)
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening Type: Latch Lock
• Contact Material: Brass
• Insulation Material: Polybutylene Terephthalate (PBT)

The substitute part GT8E-2P-DS(55) maintains identical mechanical and electrical interface specifications, ensuring direct compatibility in applications designed for the original GT8E-2P-DS connector.

Parameter Comparison

Engineering Selection Recommendations

The GT8E-2P-DS(55) is the direct substitute for the obsolete GT8E-2P-DS. Both connectors share identical mechanical and electrical interface specifications, ensuring pin-for-pin compatibility. The GT8E-2P-DS(55) carries active product status, providing assured long-term availability and supply chain continuity. The substitute part maintains RoHS compliance with ROHS3 certification and carries REACH Unaffected status, meeting current regulatory requirements. Current rating of 1A and voltage rating of 250VAC are specified for the GT8E-2P-DS(55), with operating temperature range of -40°C to 105°C. The GT8E-2P-DS(55) incorporates solder retention feature and is available in significantly higher inventory quantities, supporting production requirements.

Frequently Asked Questions (FAQ)

Q: Are GT8E-2P-DS and GT8E-2P-DS(55) mechanically interchangeable?

A: Yes. Both connectors maintain identical mounting type (through hole, right angle), shrouding configuration (shrouded 4-wall), pitch (0.079" / 2.00mm), and position count (2). Physical dimensions and PCB footprints are identical.

Q: What is the primary reason to transition from GT8E-2P-DS to GT8E-2P-DS(55)?

A: The GT8E-2P-DS is classified as obsolete product status. The GT8E-2P-DS(55) is the active equivalent, ensuring continued availability and supply chain reliability.

Q: Are there electrical performance differences between these connectors?

A: Both connectors share identical contact material (brass), contact finish (tin), and interface specifications. The GT8E-2P-DS(55) specifies operating parameters: 1A current rating, 250VAC voltage rating, and -40°C to 105°C operating temperature range.

Q: Do both parts meet current regulatory standards?

A: The GT8E-2P-DS carries RoHS Compliant status. The GT8E-2P-DS(55) carries ROHS3 Compliant certification and REACH Unaffected status, meeting current regulatory requirements.

Q: What is the packaging configuration for both parts?

A: Both connectors are supplied in tray packaging. The GT8E-2P-DS(55) is available in significantly higher inventory quantities (4063 pcs) compared to the obsolete GT8E-2P-DS (950 pcs).

Q: Are there any design modifications required when substituting GT8E-2P-DS with GT8E-2P-DS(55)?

A: No design modifications are required. The GT8E-2P-DS(55) is a direct substitute with identical mechanical and electrical interface specifications.