GT8E-2P-2V Equivalent & Substitute Parts

Part Overview

The GT8E-2P-2V is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for surface mount applications with 2 positions at 2.00mm pitch. This shrouded 4-wall header connector features solder termination and latch holder fastening, suitable for board-to-cable/wire connections.

The GT8E-2P-2V is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this connector.

Substiute Parts

GT8E-2P-2V

Hirose Electric Co LtdIn Stock: 2251GT8E-2P-2V Datasheet

Current PartRFQ

GT8E-2P-2V(55)

Hirose Electric Co LtdIn Stock: 1244GT8E-2P-2V(55) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the GT8E-2P-2V is determined by strict equivalence across the following critical parameters:

• Series alignment: GT8E
• Connector type: Header
• Contact type: Male Pin
• Number of positions: 2
• Mating pitch: 0.079" (2.00mm)
• Mounting type: Surface Mount
• Shrouding configuration: Shrouded - 4 Wall
• Termination method: Solder
• Insulation material: Polyphenylene Sulfide (PPS)
• Contact material: Brass
• RoHS compliance: RoHS Compliant

The substitute part GT8E-2P-2V(55) maintains full electrical and mechanical compatibility with the main part number while offering active product status and enhanced specifications including defined operating temperature range and current/voltage ratings.

Parameter Comparison

Engineering Selection Recommendations

The GT8E-2P-2V(55) is the direct substitute for the obsolete GT8E-2P-2V. Both parts are manufactured by Hirose Electric Co Ltd within the same GT8E series and maintain identical mechanical and electrical interface specifications.

The GT8E-2P-2V(55) offers the advantage of active product status, ensuring continued availability and manufacturing support. This variant includes defined operating temperature range (-40°C to 105°C), current rating (1A), and voltage rating (250VAC), providing explicit performance boundaries for design validation. Both parts maintain RoHS compliance and MSL 1 moisture sensitivity classification.

The GT8E-2P-2V(55) is supplied in Tape & Reel packaging, suitable for automated assembly processes. Selection of this substitute eliminates obsolescence risk while maintaining full compatibility with existing designs utilizing the GT8E-2P-2V.

Frequently Asked Questions (FAQ)

Q: Is GT8E-2P-2V(55) a direct replacement for GT8E-2P-2V?

A: Yes. Both parts share identical connector type, contact configuration, pitch, mounting method, shrouding, termination, and material specifications. The GT8E-2P-2V(55) is the active production equivalent of the obsolete GT8E-2P-2V.

Q: What is the primary difference between these two part numbers?

A: The GT8E-2P-2V is obsolete with limited specification data. The GT8E-2P-2V(55) is an active product with complete electrical specifications (operating temperature -40°C to 105°C, 1A current rating, 250VAC voltage rating) and Tape & Reel packaging for automated assembly.

Q: Are there any mechanical incompatibilities between GT8E-2P-2V and GT8E-2P-2V(55)?

A: No. Both parts maintain identical mating pitch (2.00mm), insulation height (12.00mm), shrouding configuration (4-wall), and contact geometry. They are mechanically interchangeable.

Q: What packaging options are available for the substitute part?

A: The GT8E-2P-2V(55) is supplied in Tape & Reel (TR) packaging, optimized for pick-and-place assembly operations.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both GT8E-2P-2V and GT8E-2P-2V(55) are RoHS Compliant with MSL 1 (Unlimited) moisture sensitivity classification.