GSP1.9111.1 Equivalent & Substitute Parts

Part Overview

The GSP1.9111.1 is an AC power entry receptacle manufactured by SCHURTER Inc., designed for panel-mount applications with male blade termination. This connector operates at 250VAC with a 15A current rating and features a right-angle configuration with flange mounting. The product is currently active in production and maintains full RoHS3 compliance with international approvals including CCC, cURus, and ENEC certification. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across the specified parameter set.

Substiute Parts

GSP1.9111.1

SCHURTER Inc.In Stock: 1149GSP1.9111.1 Datasheet

Current PartRFQ

703W-00/52

QualtekIn Stock: 9034703W-00/52 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the GSP1.9111.1 are qualified based on the following critical parameters:

• Connector Type: Receptacle with male blade configuration
• Voltage Rating: 250VAC minimum
• Current Rating: 10A or higher (GSP1.9111.1 rated at 15A)
• Mounting Configuration: Panel mount with flange and through-hole, right-angle orientation
• Panel Cutout Compatibility: Rectangular aperture within acceptable tolerance of 30.30mm x 22.50mm
• Panel Thickness Accommodation: 0.118" (3.00mm) nominal
• Regulatory Compliance: RoHS3 compliant with recognized approval agencies
• Ingress Protection: IP40 or equivalent environmental sealing

The substitute part 703W-00/52 meets these criteria through equivalent electrical ratings, compatible panel mounting geometry, and maintained regulatory compliance across all specified certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the GSP1.9111.1 and 703W-00/52 maintain active product status with full RoHS3 compliance. The GSP1.9111.1 provides a 15A current rating, while the 703W-00/52 is rated at 10A. Selection between these parts depends on application current requirements. The GSP1.9111.1 is suitable for applications requiring the full 15A capacity. The 703W-00/52 is appropriate for applications with maximum current draw of 10A or less. Both connectors accommodate the 0.118" (3.00mm) panel thickness specification. Panel cutout dimensions differ slightly; the 703W-00/52 requires a marginally larger aperture (31.30mm x 23.30mm versus 30.30mm x 22.50mm). Regulatory approvals differ by region: the GSP1.9111.1 carries CCC, cURus, and ENEC certifications, while the 703W-00/52 carries CSA, UL, and VDE certifications. Verify regional compliance requirements for your specific application before final selection.

Frequently Asked Questions (FAQ)

Q: Can the 703W-00/52 directly replace the GSP1.9111.1 in all applications?

A: Direct replacement is possible only in applications where the maximum current requirement does not exceed 10A. The 703W-00/52 is rated at 10A versus the GSP1.9111.1 at 15A. Panel cutout dimensions also differ slightly; verify that your panel aperture can accommodate the larger 703W-00/52 dimensions (31.30mm x 23.30mm).

Q: Are there mechanical compatibility concerns between these two connectors?

A: Both connectors feature identical panel thickness accommodation (0.118" / 3.00mm) and use the same mounting configuration (panel mount flange with through-hole, right-angle orientation). The primary mechanical difference is the panel cutout aperture size. Existing panel cutouts designed for the GSP1.9111.1 may require enlargement to accommodate the 703W-00/52.

Q: Do both parts meet the same regulatory standards?

A: Both parts are RoHS3 compliant and maintain active product status. However, approval agencies differ: GSP1.9111.1 carries CCC, cURus, and ENEC certifications, while 703W-00/52 carries CSA, UL, and VDE certifications. Confirm that the substitute part's certifications satisfy your regional and application-specific compliance requirements.

Q: What is the voltage compatibility between these connectors?

A: Both connectors are rated at 250VAC, providing equivalent voltage performance for AC power entry applications.

Q: Are there termination differences between the GSP1.9111.1 and 703W-00/52?

A: The 703W-00/52 specifies solder termination with a terminating cover. Verify that your assembly process and PCB design accommodate solder termination before selecting this substitute.