GSF1.2212.51 Equivalent & Substitute Parts

Part Overview

The GSF1.2212.51 is a power entry connector receptacle module manufactured by SCHURTER Inc., conforming to the IEC 320-C14 standard. This component functions as a male-bladed receptacle for AC power applications, rated at 10A and 250VAC. The part is classified as obsolete, necessitating identification of active equivalent models to maintain supply chain continuity for applications requiring IEC 320-C14 power entry connectivity.

Substiute Parts

GSF1.2212.51

SCHURTER Inc.In Stock: 1177GSF1.2212.51 Datasheet

Current PartRFQ

GSF1.2202.51

SCHURTER Inc.In Stock: 1000GSF1.2202.51 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GSF1.2212.51 is determined by strict equivalence across the following electrical and mechanical parameters:

• Connector style and type (IEC 320-C14, Receptacle, Male Blades - Module)
• Electrical ratings (10A at 250VAC, 3-position configuration)
• Filter classification (Unfiltered - Commercial)
• Fuse accommodation capability
• Material flammability and ingress protection ratings
• Regulatory compliance certifications

The GSF1.2202.51 qualifies as a substitute based on matching all core electrical parameters and regulatory requirements. Differences in mounting type (panel mount versus module configuration) and termination method (solder versus unspecified) represent design variations that do not affect electrical equivalence when application requirements permit panel-mount installation.

Parameter Comparison

Engineering Selection Recommendations

The GSF1.2202.51 is the primary active substitute for the obsolete GSF1.2212.51. Both components maintain electrical equivalence across all specified ratings and certifications. The GSF1.2202.51 carries active product status, ensuring ongoing availability and supply chain support.

Selection of the GSF1.2202.51 requires confirmation that the application accommodates panel-mount installation with snap-in, through-hole, right-angle configuration. The solder termination method of the substitute must be compatible with the target PCB assembly process.

Regulatory compliance is maintained across both components, with certifications from CCC, ENEC, and UL authorities. The GSF1.2212.51 includes CSA certification, while the GSF1.2202.51 carries cULus certification. Both maintain ROHS3 compliance and REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can the GSF1.2202.51 directly replace the GSF1.2212.51 in all applications?

A: Electrical and regulatory equivalence is confirmed. Physical integration depends on whether the application design permits panel-mount installation with the specified mounting and termination characteristics of the substitute.

Q: What are the key differences between these two parts?

A: The primary differences are product status (obsolete versus active), mounting configuration (module versus panel mount, snap-in), and termination method (unspecified versus solder). Electrical ratings, connector type, and safety certifications remain identical.

Q: Are there any certification differences that affect substitution?

A: Both parts maintain UL94 V-0 flammability rating and IP40 ingress protection. Certification bodies differ slightly (CSA on the main part versus cULus on the substitute), but both provide equivalent regulatory coverage for commercial AC power applications.

Q: What is the fuse accommodation specification for these connectors?

A: Both the GSF1.2212.51 and GSF1.2202.51 accommodate fuses. The GSF1.2202.51 includes a fuse holder, twin fused configuration. Fuses are not included with either component.

Q: How do the panel cutout dimensions affect substitution?

A: The GSF1.2202.51 requires a rectangular panel cutout of 27.70mm x 19.70mm with panel thickness of 0.098" (2.50mm). These dimensions must be verified against the target application's mechanical design before substitution.