GSF1.1212.31 Equivalent & Substitute Parts

Part Overview

The GSF1.1212.31 is a Power Entry Connector Receptacle with Male Blades configured for IEC 320-C14 module applications. This connector is rated for 10A at 250VAC and features an unfiltered commercial design with integrated fuse accommodation. The part is currently classified as Obsolete, necessitating identification of active equivalent models to maintain supply chain continuity for applications requiring this connector specification.

Substiute Parts

GSF1.1212.31

SCHURTER Inc.In Stock: 1031GSF1.1212.31 Datasheet

Current PartRFQ

GSF1.1202.31

SCHURTER Inc.In Stock: 822GSF1.1202.31 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The GSF1.1202.31 qualifies as a direct substitute based on the following critical parameters that remain constant across both parts:

• Connector Style: IEC 320-C14 (identical electrical interface)
• Connector Type: Receptacle, Male Blades - Module (same functional configuration)
• Current Rating: 10A (electrical capacity match)
• Voltage Rating: 250VAC (electrical specification match)
• Number of Positions: 3 (pin configuration match)
• Filter Type: Unfiltered - Commercial (same filtering approach)
• Fuse Accommodation: Yes (both support fuse integration)
• Material Flammability Rating: UL94 V-0 (identical safety rating)
• Ingress Protection: IP40 (environmental protection match)
• Approval Agencies: CCC, CSA, ENEC, UL (regulatory compliance match)
• RoHS Status: ROHS3 Compliant (environmental compliance match)

The GSF1.1202.31 differs in mounting configuration (Panel Mount, Snap-In with Through Hole, Right Angle termination) and includes an integrated Fuse Holder, representing a design evolution within the GSF1 series while maintaining electrical and safety equivalence.

Parameter Comparison

Engineering Selection Recommendations

The GSF1.1202.31 is the active equivalent for the obsolete GSF1.1212.31. Both parts maintain identical electrical specifications (10A, 250VAC, IEC 320-C14 interface) and carry equivalent regulatory certifications (CCC, CSA, ENEC, UL). Both comply with ROHS3 and REACH requirements.

The primary design difference is the mounting approach: GSF1.1202.31 incorporates panel mount capability with snap-in configuration and solder termination, whereas GSF1.1212.31 mounting specifications are not detailed. The GSF1.1202.31 includes an integrated Fuse Holder, providing enhanced functionality within the same electrical envelope.

Selection of GSF1.1202.31 is appropriate for new designs and replacement applications where the panel mount configuration and integrated fuse holder are compatible with the mechanical installation requirements.

Frequently Asked Questions (FAQ)

Q: Can GSF1.1202.31 directly replace GSF1.1212.31 in existing applications?

A: Electrical compatibility is confirmed across all specified parameters (10A, 250VAC, IEC 320-C14, 3-position, IP40, UL94 V-0). Mechanical compatibility depends on the original mounting configuration of GSF1.1212.31. GSF1.1202.31 is designed for panel mount, snap-in installation with solder termination.

Q: What is the significance of the Obsolete status for GSF1.1212.31?

A: Obsolete status indicates the part is no longer manufactured. GSF1.1202.31, classified as Active, represents the current production equivalent within the GSF1 series and is recommended for new procurement.

Q: Are the fuse accommodation specifications identical?

A: Both parts accommodate a fuse (fuse not included). GSF1.1202.31 includes an integrated Fuse Holder, while GSF1.1212.31 fuse holder specifications are not provided.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts carry identical approval agencies (CCC, CSA, ENEC, UL), material flammability rating (UL94 V-0), and compliance status (ROHS3 Compliant, REACH Unaffected).

Q: What are the panel cutout requirements for GSF1.1202.31?

A: GSF1.1202.31 requires a rectangular panel cutout of 27.70mm x 19.70mm with panel thickness of 0.059" (1.50mm) for snap-in installation.