GSF1.1012.41 Equivalent & Substitute Parts

Part Overview

The GSF1.1012.41 is a Power Entry Connector Receptacle manufactured by SCHURTER Inc., designed for IEC 320-C14 applications with male blades in a module configuration. This component is rated for 10A at 250VAC and features an unfiltered commercial design with integrated fuse accommodation. The part is currently classified as obsolete, necessitating identification of active equivalent models to maintain supply chain continuity for applications requiring this connector type.

Substiute Parts

GSF1.1012.41

SCHURTER Inc.In Stock: 1062GSF1.1012.41 Datasheet

Current PartRFQ

GSF1.1002.41

SCHURTER Inc.In Stock: 1087GSF1.1002.41 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The GSF1.1002.41 qualifies as a direct substitute based on the following critical parameters that determine functional compatibility:

Electrical Specifications (Identical):

• Connector Style: IEC 320-C14
• Connector Type: Receptacle, Male Blades - Module
• Current Rating: 10A
• Voltage Rating: 250VAC
• Number of Positions: 3
• Filter Type: Unfiltered - Commercial
• Fuse Accommodation: Yes

Safety & Compliance (Identical):

• Material Flammability Rating: UL94 V-0
• Ingress Protection: IP40
• Approval Agencies: CCC, CSA, ENEC, UL
• RoHS Status: ROHS3 Compliant

Mechanical Differences: The GSF1.1002.41 introduces panel mount configuration with flange, through-hole right-angle termination, and includes a fuse holder drawer and mounting hardware. These differences represent enhanced mechanical integration features rather than functional incompatibilities.

Parameter Comparison

Engineering Selection Recommendations

The GSF1.1002.41 is the active equivalent for the obsolete GSF1.1012.41. Both components maintain identical electrical and safety specifications, including current and voltage ratings, connector configuration, and regulatory approvals from CCC, CSA, ENEC, and UL. The GSF1.1002.41 is currently in active production status with 1071 units in stock, ensuring supply chain availability.

The primary distinction is mechanical integration: the GSF1.1002.41 incorporates panel mount capability with flange configuration and solder termination, whereas the GSF1.1012.41 specifications do not define mounting type or termination method. This represents an enhancement rather than a limitation, as the GSF1.1002.41 provides defined mechanical integration for panel-mounted applications while maintaining full electrical compatibility.

Selection of the GSF1.1002.41 is appropriate for applications requiring IEC 320-C14 receptacle functionality at 10A/250VAC with commercial unfiltered design and fuse accommodation, provided the panel mount configuration and solder termination are compatible with the target application.

Frequently Asked Questions (FAQ)

Q: Are GSF1.1012.41 and GSF1.1002.41 electrically interchangeable?

A: Yes. Both components share identical electrical specifications: IEC 320-C14 connector style, 10A current rating, 250VAC voltage rating, 3-position configuration, and unfiltered commercial filter type. Both accommodate fuses and carry identical safety certifications (UL94 V-0, IP40, CCC, CSA, ENEC, UL).

Q: What is the primary difference between these parts?

A: The GSF1.1002.41 specifies panel mount configuration with flange, through-hole right-angle termination, and includes a fuse holder drawer with mounting hardware. The GSF1.1012.41 does not define these mechanical parameters. The GSF1.1002.41 is suitable for panel-mounted applications, while the GSF1.1012.41 configuration is not specified.

Q: Why is GSF1.1012.41 obsolete?

A: The GSF1.1012.41 is classified as obsolete by the manufacturer. The GSF1.1002.41 represents the active production equivalent within the GSF1 series.

Q: Can GSF1.1002.41 be used in applications originally designed for GSF1.1012.41?

A: Compatibility depends on mechanical integration requirements. If the original application accommodates panel mount configuration with flange and solder termination, the GSF1.1002.41 is a direct substitute. If the original application requires different mounting or termination methods, mechanical compatibility must be evaluated separately from electrical compatibility.

Q: What certifications apply to both parts?

A: Both GSF1.1012.41 and GSF1.1002.41 carry approvals from CCC, CSA, ENEC, and UL. Both are ROHS3 compliant and REACH unaffected.

Q: Is fuse accommodation identical between the parts?

A: Yes. Both parts accommodate fuses (fuse not included). The GSF1.1002.41 additionally specifies a fuse holder drawer as an integrated feature.