GS2JFL-TP Equivalent & Substitute Parts

Part Overview

The GS2JFL-TP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 600V DC reverse voltage and 2A average rectified current in a surface mount DO-221AC (SMA Flat Leads) package. This component is classified as Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter range. Alternative sources provide design flexibility, supply chain redundancy, and inventory availability for production requirements.

Substiute Parts

GS2JFL-TP

Micro Commercial CoIn Stock: 815GS2JFL-TP Datasheet

Current PartRFQ

GS2JAFC_R1_00001

Panjit International Inc.In Stock: 3082GS2JAFC_R1_00001 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GS2JFL-TP is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Voltage - DC Reverse (Vr) (Max): 600 V
• Current - Average Rectified (Io): 2 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 2 A
• Speed: Standard Recovery >500ns, > 200mA (Io)
• Operating Temperature - Junction: -55°C to 150°C

Mechanical Parameters (Must Match):

• Mounting Type: Surface Mount
• Package / Case: DO-221AC, SMA Flat Leads

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute part GS2JAFC_R1_00001 meets all critical electrical and mechanical requirements. Minor variations in reverse leakage current (1 µA vs. 5 µA @ 600 V) and junction capacitance (18 pF vs. 20 pF @ 4V, 1MHz) remain within acceptable tolerance for general-purpose rectification applications and do not disqualify substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Both the GS2JFL-TP and GS2JAFC_R1_00001 are Active product status components with full RoHS3 compliance and REACH unaffected status. Selection between these parts is based on availability and supply chain requirements rather than electrical performance differentiation.

The GS2JFL-TP (Micro Commercial Co) maintains 752 pieces in current inventory. The GS2JAFC_R1_00001 (Panjit International Inc.) provides 3050 pieces in inventory, offering greater availability for high-volume production requirements.

Both components are suitable for general-purpose rectification applications requiring 600V reverse voltage rating and 2A average rectified current in surface mount configuration. The identical forward voltage characteristic (1.1 V @ 2 A) and recovery speed specification ensure functional interchangeability in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can GS2JAFC_R1_00001 be used as a direct replacement for GS2JFL-TP?

A: Yes. Both parts share identical electrical ratings (600V, 2A), forward voltage characteristics (1.1 V @ 2 A), recovery speed specification, and mechanical package (DO-221AC, SMA Flat Leads). Both are RoHS3 compliant with MSL 1 rating and -55°C to 150°C operating temperature range.

Q: What is the difference in reverse leakage current between these parts?

A: The GS2JFL-TP specifies 5 µA @ 600 V reverse leakage, while GS2JAFC_R1_00001 specifies 1 µA @ 600 V. The lower leakage in the Panjit part represents improved performance characteristics and does not prevent substitution.

Q: Are the package dimensions identical?

A: Both parts use the DO-221AC package with SMA Flat Leads configuration. The supplier device package designation differs (DO-221AC (SMA-FL) vs. SMAF-C), but both reference the same mechanical standard, ensuring PCB footprint compatibility.

Q: What is the capacitance difference, and does it affect circuit performance?

A: The GS2JFL-TP specifies 20 pF @ 4V, 1MHz, while GS2JAFC_R1_00001 specifies 18 pF @ 4V, 1MHz. This 2 pF difference is negligible for general-purpose rectification applications and does not require circuit redesign.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both components are rated for -55°C to 150°C junction temperature operation, supporting applications requiring extended thermal range performance.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8541.10.0080. Both maintain MSL 1 (Unlimited) moisture sensitivity level.